Page 16 of 48 pages
LENCO
TFT-711
ENGLISH
In this sub-menu the setting can be set for the On-Screen-Display information. Select at
Info
Display Time
the seconds (3, 5 0r 10 seconds) a menu item will appear on screen after
which it will disappear automatically.
The appearance of the menu can be changed into another color. Select the color of your
choice in
Design Monde.
LCN Channel Numbering
can be set to ON to list TV channels with their Logical Channel
Number. Depending the DVB-T area and provider, TV channels have an assigned and
predefined Logical Channel Number. When LCN Channel Numbering is set to OFF, the TV
channels found will get a channel number in order of their frequency and will be listed in that
order in the TV Main List. When LCN Channel Numbering is set to ON and LCN information
is available in the transmission, the channels will be listed with their respective LCN number.
See chapter LCN for more information.
The
Signal Bar
can be displayed on screen constantly when this selection is set to ON.
Default is OFF and the signal bar is not displayed on screen. The signal bar displays the
Signal Quality and Field Strength. This is particularly handy for tuning an (outside) antenna
adjustment during an installation. While calibrating or orientating an (outside) antenna the
signal field strength and quality will rise or decrease. Align the antenna such that maximum
field strength and quality is displayed.
Press the
YELLOW
or
EXIT
key to return one level in the sub-menu or press the
BLUE
key
to return to the TV image
.
When no DVB-T signal is present the Signal Bar shows no indication and the Antenna is
stroked out.