Page 25 of 48 pages
LENCO
TFT-711
ENGLISH
Re-Installation
In the installation menu, select
Re-Installation
and press
OK
. The following screen will be
displayed.
Press the
GREEN
key to reset all settings to the factory default setting. All scanned and
stored channels will remain in memory. Press the
RED
key to cancel this operation.
After pressing the
GREEN
button you will be prompted to enter the Super Pin Code: Enter
32168
with the number keys after which the reset procedure will start. Press the
RED
key
twice to cancel this operation before entering the Super Pin Code.
Note:
after pressing the
last 8 it looks like nothing is happening, however the unit is resetting in the background.
DO
NOT
switch OFF the unit or remove power, this might damage the unit and result in incorrect
operation.
After the re-installation is finished, the
First Time Setup
screen will be visible. For correct
operation it is recommended to switch OFF the unit with the unit’s power button (18). Wait a
few seconds and power the unit ON. The
First Time Setup
screen will be visible. See chapter
First Time Setup
for details.