NGP Keypad Installation Guide
revision 1.007 —
33
Notes:
The default Master (end) User code is ID 01 or 001, PIN 7793.
The default Service User ID 00 or 000, PIN 2482.
Config method
will appear. With the arrows, toggle between
Simplified
or
Advanced
for the
process to set up the system as required.
•
If
Simplified
is chosen, ordinary language menus will appear to browse through and make
selections from for a basic system.
•
If
Advanced
is chosen, special menus will appear to customize the system into several unique forms
of security requirements.
6.1.3
Logging On to a New UK ACPO System
After the
ComsLost
keypad screen and entry of
24822
, the screen will display that the system is in alarm
and needs to be re-set.
Enter the UK service user code:
000
and PIN:
1630
.
A user code and PIN for a second user will be requested.
Enter the Master User default code:
001
and PIN:
7793
.
The next screen will request the date and time to be entered.
The next screen will display that the system is in alarm and enter ID to restore it.
The Master User codes can be entered; however, if a service user enters 000, the next screen will request a
Pin of the Day to log on. After that is entered, a secondary user code will be requested. The Master user
codes can be used again.
6.1.4
UK ACPO Pin of the Day
The service user will call the Pin of the Day program operator, who can enter default
24822
as the new
system's default Dealer ID until a unique one can be entered at the keypad or downloaded from the access
control software later.
The service user enters a random, 6-digit PIN of the Day number given to the user by the operator at the
keypad. The service user can then access the system menus and configurations.
Also see Pin of the Day in the
Advanced Installation Guide.
6.1.5
Remote Connection
If a Remote connection is selected, the next screen will display a left or right arrow selection for IP or the
version of modem board plugged into the main control module (e.g., World Wide Modem, see page 25).
Important:
When one of the modems is used, it must be plugged into the main control
module before remote connection screens can be viewed. Press the button below
Ok
.
The next screen will ask to
Select country
for the style of system configurations that are required for
different places in the world. Use the left-right arrow keys to toggle through them. The selections are:
•
N (North) America,
Summary of Contents for OnGuard 2013
