background image

3

3A

The unit must never be used by children or unfit persons without
supervision.
This appliance is intended to be used by expert or trained users in
shops, in light industry and on farms, or for commercial use by lay
persons.
It is dangerous to touch the unit with damp parts of the body and
bare feet.
Never tamper or modify regulation and safety devices without prior
authorisation and instructions.
Never twist, detach or pull power cables, even when the unit is
unplugged from the mains power supply.
Neither throw nor spray water on the unit.
Never introduce foreign objects through the air intake and discharge
grids.
Never remove protective elements without first unplugging the unit
from the mains power supply.
Do not throw packaging material away or leave it with in reach of
children as it may represent a hazard.
Do not install in explosive, corrosive or damp environments, outdoors
or in very dusty rooms.

           FUNDAMENTAL SAFETY RULES

Carefully 

read the following user information manual

before starting up the machine.

Warning!
Particularly important and/or delicate operations.

Operations which may be carried out by the user.

Interventions to be carried out 

exclusively

by an installer or authorized technician.

This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved.
Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without
supervision.
Before carrying out any operation on the appliance, make sure:
1 - The unit is disconnected from the electrical power supply.
2 - The coil water supply valve is closed
    and the coil has cooled down.
3 - Install a safety switch to turn off current
  to the appliance in an easily accessible
    position  near the unit or units.
During installation, maintenance and repairs, for safety reasons,
observe the following precautions:
•  Always use work gloves.
•  Do not expose to inflammable gas.
•  Do not place objects over the grids.
Make sure the unit is earthed.
When moving the appliance, lift it by yourself (for
weights of under 30 kg) or with the help of another
person.
Lift it slowly, taking care not to drop it.
Never introduce objects or the hand into the fans.
Do not remove the safety labels inside the appliance.
If you cannot read the labels, ask for replacements.
Always use original spare parts.

U
K

Summary of Contents for AXIL 402


















Reviews: