eNeRGy-IOM-2020.11-EN
•
7
•
EMC DIRECTIVE COMPLIANCE
WARNING:
This equipment is a “B class” according EMC Directive. In an industrial environment, this device can create radio electrical noise. In this
case, the owner can be asked to take appropriated actions.
The units meet the following hardest environments standards:
-
EN 61000-6-3: program for residential, commercial and light industry applications.
-
EN 61000-6-2: immunity for industrial applications
In emission devices having a rated current I < 75A:
-
For machines with variable speed compressor, the short-circuit ratio Rsce is: 120 (EN 61000-3-12)
-
For machines without variable speed compressor, the short-circuit ratio Rsce is: 66 (EN 61000-3-12)
-
The maximum network impedance authorized Zmax is: 0.17 (EN 61000-3-11).
The differences between the various machines are only related to the power of the compressors and equipment that are associated.
For conducted and radiated emission and immunity, these differences do not alter the results.
F-Gas REGULATION
PLEASE READ THE SAFETY DATA SHEET OF THE REFRIGERANT BEFORE ANY INTERVENTION OR INSTALLATION OF THE MACHINE.
Operators of refrigeration equipment’s must comply with the obligations defined in
•
Regulation on Fluorinated greenhouse gases (F Gas)
•
Regulation on substances that deplete the ozone layer
Non-compliance with these requirements is an offence and liable of financial penalties.
Moreover, in case of problem it is mandatory to prove to the insurance company that the
equipment complies with the F gas Regulation, as well as that all measures have been taken to
safeguard people, environment and property.
WARRANTY
The warranty of the unit is subject to the warranty definitions as agreed upon in the order. It is expected that the design and installation
of the unit utilise good working practices. The warranty will be legally null and void if:
•
Service and maintenance have not been executed in accordance with the regulations; repairs have not been carried out
by LENNOX personnel or have been implemented without prior written permission by LENNOX.
•
Modifications have been made to the equipment without prior written permission by LENNOX.
•
Settings and protections have been modified without prior written permission by LENNOX.
•
Non-original or other than the prescribed refrigerants or lubricants are used.
•
The equipment has not been installed and/or connected in accordance with the installation instructions.
•
The equipment is being used improperly, incorrectly, negligently or not in accordance with its nature and/or purpose.
•
A flow protection device is not fitted.
•
The unit maintenance booklet is not complete or not available.
In these circumstances LENNOX is indemnified from any product liability claims from third parties.
In the event of a warranty claim the machine serial number and LENNOX order number must be quoted.
The technical information and specifications contained in this manual are for reference only. The manufacturer reserves the right to
modify these without warning and without obligation to modify equipment already sold
WARNING
- All the technical and technological information contained in this manual, including any drawing and technical
descriptions provided by us, remain the property of LENNOX and must not be utilised (except in operation of this
product),reproduced, issued to or made available to third parties without the prior written agreement of LENNOX. The technical
information and specifications contained in this manual are for reference only. The manufacturer reserves the right to modify
these without warning and without obligation to modify equipment already sold.
INTRODUCTION
Summary of Contents for E014AH055FM2M
Page 2: ......
Page 5: ...eNeRGy IOM 2020 11 EN 5...
