Page 3
SPECIFICATIONS
Gas
H
ti
ModelNo.
G50UHi−60C−110
G50UHi−60D−135
Heating
Performance
Input− Btuh (kW)
110,000 (32.2)
132,000 (38.7)
Performance
Output− Btuh (kW)
89,400 (26.2)
106,900 (31.3)
1
AFUE
80.0%
80.0%
California Seasonal Efficiency
73.9%
75.0%
Highstatic (CSA) − in.w.g. (Pa)
.50 (124)
.50 (124)
Temperature rise range −
_
F (
_
C)
30 − 60 (18 − 36)
45 − 75 (25 − 42)
Connections
Flue − in. (mm) round
4 (102)
5
4 (102)
GaspipesizeIPS− in. (mm)
1/2 (12.7)
1/2 (12.7)
Indoor
Blower
Wheelnominaldiameter xwidth −in. (mm)
11−1/2 x 10 (292 x 254)
11−1/2 x 10 (292 x 254)
Blower
Motoroutput − hp (W)
1 (746)
1 (746)
Tons(kW) ofadd-oncooling
5 (17.6)
5 (17.6)
Shippingweight − 1 package
175 lbs. (79 kg)
195 lbs. (88 kg)
Electricalcharacteristics
120 volts − 60 hertz − 1 phase (less than 12 amps)
OPTIONAL ACCESSORIES − MUST BE ORDERED EXTRA
Filters and
Filter Bases
2
Air Filter and Rack Kit
Number & size of filters
Horizontal (end) − in. (mm)
87L97
(1) 20 x 25 x 1 (508 x 635 x 25)
87L98
(1) 25 x 25 x 1 (635 x 635 x 25)
Filter Bases
Number & size of filters
Side Return − in. (mm)
Single
44J22
or Ten Pack
66K63
(1) 16 x 25 x 1 (406 x 635 x 25)
Single
44J22
or Ten Pack
66K63
(1) 16 x 25 x 1 (406 x 635 x 25)
EZ Filter
Base
Catalog Number − Shipping Weight
73P57
− 8 lbs. (4 kg)
73P58
− 10 lbs. (5 kg)
Dimensions − H x W x D − in. (mm)
4 x 21−5/8 x 28−5/8 (102 x 549 x 727)
4 x 24−5/8 x 28−5/8 (102 x 625 x 727)
Number and size of filter (field provided)
20 x 25 x 1 in. (508 x 635 x25 mm)
24 x 24 x 1 in. (610 x 610 x 25 mm)
Gas
Accessories
3
High Altitude Orifice Kit − Nat. Gas Only
47M82
47M82
Accessories
4
High Altitude
Pressure Switch Kit
4501−7500 ft. (1372−2286 m)
49L90
49L90
Pressure Switch Kit
7501−10,000 ft. (2286−3048 m)
15M22
15M22
LPG/Propane Kit
0−7500 ft. (0−2286 m)
45L60
45L60
p
7501−10,000 ft. (2286−3048 m)
47M81
47M81
Horizontal Support Frame Kit
− Shipping Weight
56J18
− 18 lbs. (8 kg)
56J18
− 18 lbs. (8 kg)
Relay Kit
56L68
56L68
SignatureStat
t
− Home Comfort Controller
51M26
51M26
Vent Adaptor
− 6 in. 152 (mm) connection size
18M79 −
2 lbs. (1 kg)
18M79 −
2 lbs. (1 kg)
NOTE − Filters and provisions for mounting are not furnished and must be field provided.
1
Annual Fuel Utilization Efficiency based on DOE test procedures and according to FTC labeling regulations. Isolated combustion system rating for non-weatherized furnaces.
2
Cleanable polyurethane frame type filter.
3
Required for proper operation at altitudes from 7501 to 10,000 ft. (2286 to 3048 m).
4
Required for proper operation at altitudes over 4500 ft. (1370 m).
5
Flue connection on the unit is 4 in. (102 mm) diameter. Most applications will require 5 in. (127 mm) venting and field supplied 4 x 5 in. (102 x 127 mm) adaptor. See
Venting Tables in the Installation Instructions for detailed information.
HIGH ALTITUDE INFORMATION
All models − Pressure regulator adjustment may be required de-
pending on altitude. See below for proper pressure regulator
setting.
Manifold Pressure (Outlet) in. w.g. (kPa)
ALTITUDE ft. (m)
FUEL
0−4500
(0−1372)
4501−5500
(1373−1676
)
5501−6500
(1677−1981
)
6501−7500
(1982−2286
)
Natural Gas
3.5 (.87)
3.3 (.82)
3.2 (.80)
3.1 (.77)
LPG/Propane
10.0 (2.49)
10.0 (2.49)
10.0 (2.49)
10.0 (2.49)
Pressure switch is factory set. No adjustment is necessary.
All models use the factory installed pressure switch from 0−4500 feet
(0−1370 m).
All models require a High Altitude Pressure Switch Kit if installed at altitudes
above 4500 feet (1372 m).
All natural gas models require a High Altitude Orifice Kit at altitudes of
7500−10,000 feet (2286−3048 m).
See Specifications table for ordering information.
Summary of Contents for G50UHi Series
Page 6: ...Page 6 FIGURE 1...
