507146-01 5/2013
Page 22
CREATING A WI-FI CONNECTION TO A HIDDEN NETWORK
1. When connecting to a hidden network, press the add new network icon
to continue. Enter the
network name (SSID)
. If security encryption is
enabled, then press the
security is none
icon. Select either
WEP
,
WPA
or
WPA2
. Using the on-screen keyboard, enter the password (se
curity key). If the network name or security key combination is incorrect
or incorrectly type, and access to the specified network failed, a mes
sage will alert you to retry.
Press any line to edit
network name (SSID)
security is
none
none
WEP
WPA
WPA2
password
Figure 41. Network Manual Setup
2. Press
connect
to complete the connection. Note that “Wi-Fi enable”
button on the Wi-Fi SETTINGS screen changes to “Wi-Fi disable”.
Register the icomfort
Wi‐Fi
®
Thermostat
From NETWORK SETTINGS screen, you can change to the desired net
work as shown in figure 42. Enter security key or passphrase. “X” back to the
WI-FI SETTINGS screen.
choose a wireless network
add new
network
NETWKB
NETWKC
NETWKD *
NETGEAR
NOTE NETWORK's marked with *
‐ Selecting one of these
wireless networks may result in an unreliable connection to
your thermostat. Press help “?” for tips on improving signal
strength.
Wi-Fi
9:39 am January 23, 2012
AP Info
dis-
connect
type the network security key or passphrase for
NETGEAR
(returns to
WI-FI SETTINGS
screen)
Figure 42. Change Networks
REGISTRATION FOR ONLINE ACCESS
From the WI-FI SETTINGS screen, press the “
thermostat not registered
”
button (see figure 43). Enter homeowner email address twice and press the
register
button.
A pop up screen then appears to notify the user to check their home comput
er for instructions to complete the registration. After the server sends the
email with the network link, registration and account creation must be com
pleted on the homeowner's personal computer.
NOTE - Time from pushing the registration button on the thermostat and re
ceiving the consumer portal register link from your email on your computer is
from 5 to 15 minutes.
After registration has been completed, any available firmware downloads
will immediately start downloading to the thermostat.
