6
10.
Secure back plate and wall plate (optional) to
wall with the two provided mounting screws.
Wall Plate (optional)
Zone Sensor Back Plate
Screw
Z
one
s
ensor
t
erminal
i
nformation
Table 2. Terminal Designations
PWR D+ D- C
Terminal
Purpose
PWR
Zone sensor power 12VDC input.
D+
Zone sensor data high.
D-
Zone sensor data low.
C
Zone sensor 12VDC return.
See “Figure 2. Connecting Zone Sensor to Damper Control Module”
on page 7.
C
onneCting
Z
one
s
ensor
W
iring
Use “Table 2. Terminal Designations” on page
6for connecting the thermostat wiring to the
back plate terminals.
Figure 1. Backplate
NOTE: Remember to seal the hole in the wall with
a suitable material to prevent drafts from
entering the zone sensor case. Not doing
so could affect the zone sensor’s internal
temperature and humidity sensors.
