background image

ML180UH

SERIES

Litho U.S.A.

506525-01
01/2015
Supersedes 10/2012

E

 2015 Lennox Industries Inc.

Dallas, Texas, USA

WHAT TO DO IF YOU SMELL GAS:

Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other ap­
pliance.

Installation and service must be
performed by a qualified installer,
service agency or the gas supplier.

D

Do not try to light any appliance.

D

Do not touch any electrical switch; do not
use any phone in your building.

D

Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's
instructions.

D

If you cannot reach your gas supplier, call
the fire department.

D

Leave the building immediately.

GAS FURNACE

FIRE OR EXPLOSION HAZARD.

Failure to follow safety warnings exact­
ly could result in serious injury, death,
or property damage.

WARNING

Improper installation, adjustment, alteration, service
or maintenance can cause property damage, personal
injury or loss of life. Installation and service must be
performed by a licensed professional installer (or
equivalent), a service agency, or the gas supplier.

WARNING

Summary of Contents for ML180UH SERIES








Reviews: