Replacing CRUs
30
Replacing the internal speaker
Attention
Do not open your computer or attempt any repairs before reading the
Important
Product Information Guide
.
1
Remove any media from the drives and turn off all connected devices and the computer.
2
Disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the computer.
3
Remove the computer cover. For details, see
4
Disconnect the internal speaker cable from the internal speaker connector on the system board.
5
Replace the internal speaker.
1
2
6
Connect the internal speaker cable to the internal speaker connector on the system board.
7
Reinstall the computer cover and reconnect the cables. For details, see