Replacing CRUs
38
Replacing the memory module
Attention
Do not open your computer or attempt any repairs before reading the
Important
Product Information Guide
.
If your computer supports one memory module, install the module into the DIMM 1 slot. If your computer
supports two memory modules, install one memory module into the DIMM 1 slot first and then install the
other into the DIMM 2 slot. See
for the locations of the slots.
1
Remove any media from the drives and turn off all connected devices and the computer.
2
Disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the computer.
3
Remove the computer cover. For details, see
4
Remove the bottom cover. For details, see
5
Replace the memory module.
1
2
3
4
6
Reinstall the removed parts and computer cover. For details, see
