• Remove the device driver (run rrm
mm
mo
od
d under Linux).
• Disable the LAN over USB interface from the advanced management module web interface:
1. Log in to the AMM web interface.
2. In the navigation pane, click
Blade Configuration
under the
Blade Tasks
heading.
3. Scroll down to the Service Processor LAN over USB interface on the Blade Configuration web page.
The section lists all blades in the chassis that can enable or disable the LAN over USB interface.
4. Select the check boxes next to the blade servers that you want to enable or disable.
5. Click
Disable
to disable the LAN over USB interface on the selected blade servers.
Configuring the LAN over USB interface manually
An IMM must be configured to use the LAN over USB interface. The firmware update package or Advanced
Settings Utility attempt to perform the setup automatically, if needed. If the automatic setup fails or if you
prefer to set up the LAN over USB manually, use one of the following processes.
For more information about LAN over USB configuration on different operating systems, see the IBM white
paper
Transitioning to UEFI and IMM
Installing the LAN over USB Windows device driver
When you install a Windows operating system, there will be an unknown RNDIS device in the Device
Manager. IBM provides a Windows INF file that identifies this device. The signed version of the INF file is
included in all of the Windows versions of the IMM, UEFI, and DSA update packages. Complete the following
steps to install
ibm_rndis_server_os.inf
.
Note:
You only have to perform these steps if the server is running a Windows operating system and the
ibm_
rndis_server_os.inf
file has not been previously installed. The file only has to be installed once. It is required
by Windows operating systems to detect and use the LAN over USB functionality.
1. Obtain a Windows version of the server UEFI code package (see “Updating firmware and device drivers”
on page 84 for more information).
2. Extract the
ibm_rndis_server_os.inf
and
device.cat
files from the firmware update package and copy
them to the
\WINDOWS\inf
subdirectory.
Note:
You can use the -x
path
command-line interface option to extract the files. For more information
about this option, see the readme file that comes with the update package.
3. (Windows 2003) Install the
ibm_rndis_server_os.inf
file by right-clicking the file and clicking
Install
. This
generates a PNF file of the same name in
\WINDOWS\inf
. (Windows 2008) Click
Computer Management
,
then
Device Manager
and find the RNDIS Device. Click
Properties > Driver > Reinstall driver
. Point
the server to the
\Windows\inf
directory where it can find the
ibm_rndis_server_os.inf
file and install the
device.
4. Click
Computer Management
then
Device Manager
. Right-click
Network adapters
and select
Scan
for hardware changes
. A small pop-up confirms that the Ethernet device is found and installed. The
New Hardware Wizard starts automatically.
5. When you are prompted
Can Windows connect to Windows Update to search for software?
, select
No, not
this time
. Click
Next
to continue.
6. When you are prompted
What do you want the wizard to do?
, select
Install from a list or specific
location (Advanced)
. Click
Next
to continue.
7. When you are prompted
Please choose your search and installation options
, select
Don't search. I will
choose the driver to install
. Click
Next
to continue.
8. When you are prompted
Select a hardware type, and then click Next
, select
Network adapters
. Click
Next
to continue.
110
BladeCenter HX5 Blade ServerInstallation and User's Guide
Summary of Contents for 1909
