Attention:
Handling an HDD
v
Do not drop the drive or subject it to physical shocks. Place the drive on a soft
material, such as cloth, which absorbs physical shock.
v
Do not apply pressure to the cover of the drive.
v
Do not touch the connector.
The drive is very sensitive. Incorrect handling can cause damage and permanent loss
of data on the drive. Before removing the HDD, make a backup copy of all the data
on the drive, and turn the computer off. Never remove the drive while the system is
operating, in standby mode, or in hibernation mode.
To replace the HDD, do the following:
1.
Turn off the computer
; then disconnect the AC adapter and all cables
from the computer.
2.
Close the computer display, and turn the computer over.
3.
Remove the battery.
4.
Remove the screw that secures the slot cover
1
, and remove the slot
cover
2
.
1
2
Chapter 5. Upgrading and replacing devices
35
Summary of Contents for 2746AD4 - ThinkPad SL500 2746
