Related service information
This chapter presents following information:
v
“Restoring the factory contents by using Product Recovery discs”
v
“Restoring the factory contents by using Recovery Disc Set” on page 56
v
“Passwords” on page 57
v
“Power management” on page 60
v
“Symptom-to-FRU index” on page 62
Restoring the factory contents by using Product Recovery discs
When the hard disk drive (HDD) or solid state drive (SSD) is replaced because of a
failure, no Product Recovery program is on the new drive. In this case, you must
use the recovery discs for the computer. Order the recovery discs and the drive at
the same time so that you can recover the new drive with the pre-installed
software when they arrive. For information on which discs to order, see “Recovery
discs” on page 189.
To install the factory contents by using Product Recovery discs, do the following:
1.
Insert the bootable
Start Recovery Disc
into the DVD drive.
2.
Select your language and click
Next
.
3.
Read the license. If you agree with the terms, select
I accept these terms and
conditions
and then click
Next
.
4.
Insert the
Operating System Recovery Disc
when prompted and click
Yes
to
begin the operating system recovery process.
5.
Insert the
Product Recovery Disc
when prompted and click
OK
.
6.
If you have a
Supplemental Recovery Disc
, insert it when prompted and click
Yes
. If you do not have a
Supplemental Recovery Disc
, click
No
.
Note:
Not all recovery disc sets come with a
Supplemental Recovery Disc
. If
there is a
Supplemental Recovery Disc
, it will be clearly marked as such.
7.
When all of the data has been copied from the last disc in the set, a message is
displayed prompting you to restart the computer. Remove the disc and then
click
Yes
.
Note:
The remainder of the recovery process is fully automated and no action
is required by you. The computer will restart into the Windows desktop several
times and you might experience periods when no activity is apparent on the
screen for several minutes at a time. This is normal.
Service Web site:
When the latest maintenance diskette and the system program service diskette
become available, they will be posted on
http://www.lenovo.com/spm
Note:
Recovery takes several hours. The length of time depends on the method
you use. If you use recovery discs, recovery takes at least five hours.
© Copyright Lenovo 2009, 2010
55
Summary of Contents for 2808C5U
