16. Close all open windows and remove the CD.
17. Restart the system
The system will automatically select the maximum refresh rate and corresponding
Color Matching Profiles. .
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display
quality. Lenovo recommends using either 1920 x 1080 at a refresh rate of 60Hz,
or 640 x 480 at a refresh rate of 60 Hz.
Installing the monitor driver in Windows XP
To use the Plug and Play feature in Windows XP, files should be loaded from the
Reference and Driver CD.
Note: This section must be completed before continuing with the Windows XP
automatic image setup.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow the system to boot into
Windows XP.
4. Open the
Display Properties
window by clicking
Start
Settings
Controlol
Panel
, select/enter into the
Display
control panel.
5. Click the
Settings
tab.
6. Click the
Advanced
button.
7. Click the
Monitor
tab.
8. Click the
Properties
button.
9. Click the
Drivers
tab.
10. Open the
Hardware Update Wizard
window by clicking on the
Update
Driver
, If appears “
Can Windows connect to Windows Update...
” window,
please select
“
No, not this time
” option. and then click
Next
.
11. Select “
Install from a list or Specific location(Advanced)
”, and then click
Next
.
12. Select “
Don't search. I will choose the driver to install
” option, and then
click
Next
.
13. Click the
Have Disk
button. Click on the
Browse
button and navigate to the
following directory:
X:\Monitor Drivers\Windows XP
(where X is the drive letter designator for the CD-ROM drive).
14. Select the "
LT2323zwC.inf
" file and click the Open button. Click on the OK
button.
3-6 LT2323zwC Flat Panel Monitor User’s Guide
