X:\Monitor Drivers
(where X is the drive letter designator for the
CD-ROM
drive).
Installing the monitor driver in Windows Vista
To use the Plug and Play feature in Microsoft Windows Vista, do the following:
Note:
You must download file from the Reference and Driver CD to use the Plug and Play feature
in Windows Vista.
Turn off the computer and all attached devices.
1.
Ensure that the monitor is connected correctly.
2.
Turn on the monitor and then the system unit. Allow your computer to start the Windows Vista
3.
operating system.
Click
4.
Start
,
Control Panel
and then click the
Hardware
and
Sound
icon.
Click the
5.
Personalization
icon.
Click the
6.
Display Settings
icon.
Click the
7.
Advanced Settings
button.
Click the
8.
Monitor
tab.
Click the
9.
Properties
button.
Click the
10.
Driver
tab.
Click
11.
Update Driver
, then click
Browse the computer to find the driver program
.
Select
12.
Pick from the list of device driver program on the computer
.
Click the
13.
Have Disk
button. Click the
Browse
button and navigate to the following directory:
Select the "
14.
LI2341t Wide�inf
" file and click the
Open
button. Click the
OK
button.
Select
15.
LEN LI2341t Wide
and click
Next
. The files will be copied from the CD to your hard
disk drive.
Close all open windows and remove the CD.
16.
Restart the system. The system will automatically select the maximum refresh rate and
17.
corresponding Color Matching Profiles.
Note:
On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a refresh
rate of 60 Hz.
Chapter 3. 3-7
