Diagnostic Error Code
FRU/Action
015-196-XXX
USB port test halt, error threshold exceeded
1.
Press F3 to review the log file
2. Re-start the test to reset the log file
015-197-XXX
USB port test warning
1.
Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility” on page 39
2. Re-run test
3. Replace the component that is called out in warning
statement
4. Replace the component under test
015-198-XXX
USB port test aborted
1.
If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility” on page 39
2. Flash the system and re-test. See “Flash update
procedures” on page 259
3. Go to “Undetermined problems” on page 73
015-199-XXX
USB port test failed, cause unknown
1. Go to “Undetermined problems” on page 73
2. Flash the system and re-test. See “Flash update
procedures” on page 259
3. Replace component under function test
018-000-XXX
PCI Card Test Passed
No action
018-0XX-XXX
PCI Card Failure
1.
Riser card, if installed
2. System board
018-195-XXX
PCI Card Test aborted by user
1.
PCI card
2.
Information only
Re-start the test, if necessary
018-196-XXX
PCI Card test halt, error threshold exceeded
1.
Press F3 to review the log file
2. Re-start the test to reset the log file
018-197-XXX
PCI Card test warning
1.
Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility” on page 39
2. Re-run test
3. Replace the component that is called out in warning
statement
4. Replace the component under test
018-198-XXX
PCI Card test aborted
1.
If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility” on page 39
2. Flash the system and re-test. See “Flash update
procedures” on page 259
3. Go to “Undetermined problems” on page 73
018-199-XXX
PCI Card test failed, cause unknown
1. Go to “Undetermined problems” on page 73
2. Flash the system and re-test. See “Flash update
procedures” on page 259
3. Replace component under function test
60
ThinkStation Hardware Maintenance Manual
Summary of Contents for 4157 - ThinkStation S20 - 2 GB RAM
