Specific details about updating firmware using Lenovo XClarity Administrator are available at:
http://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxca.doc/update_fw.html
Configure the firmware
Several options are available to install and set up the firmware for the server.
Important:
Do not configure option ROMs to be set to
Legacy
unless directed to do so by Lenovo Support.
This setting prevents UEFI drivers for the slot devices from loading, which can cause negative side effects for
Lenovo software, such as Lenovo XClarity Administrator and Lenovo XClarity Essentials OneCLI, and to the
Lenovo XClarity Controller. The side effects include the inability to determine adapter card details, such as
model name and firmware levels. When adapter card information is not available, generic information for the
model name, such as "Adapter 06:00:00" instead of the actually model name, such as "ThinkSystem RAID
930-16i 4GB Flash." In some cases, the UEFI boot process might also hang.
•
Lenovo XClarity Provisioning Manager
From Lenovo XClarity Provisioning Manager, you can configure the UEFI settings for your server.
Note:
The Lenovo XClarity Provisioning Manager provides a Graphical User Interface to configure a
server. The text-based interface to system configuration (the Setup Utility) is also available. From Lenovo
XClarity Provisioning Manager, you can choose to restart the server and access the text-based interface.
In addition, you can choose to make the text-based interface the default interface that is displayed when
you press F1.
•
Lenovo XClarity Essentials OneCLI
You can use the config application and commands to view the current system configuration settings and
make changes to Lenovo XClarity Controller and UEFI. The saved configuration information can be used
to replicate or restore other systems.
For information about configuring the server using Lenovo XClarity Essentials OneCLI, see:
http://sysmgt.lenovofiles.com/help/topic/toolsctr_cli_lenovo/onecli_c_settings_info_commands.html
•
Lenovo XClarity Administrator
You can quickly provision and pre-provision all of your servers using a consistent configuration.
Configuration settings (such as local storage, I/O adapters, boot settings, firmware, ports, and Lenovo
XClarity Controller and UEFI settings) are saved as a server pattern that can be applied to one or more
managed servers. When the server patterns are updated, the changes are automatically deployed to the
applied servers.
Specific details about updating firmware using Lenovo XClarity Administrator are available at:
http://sysmgt.lenovofiles.com/help/topic/com.lenovo.lxca.doc/server_configuring.html
•
Lenovo XClarity Controller
You can configure the management processor for the server through the Lenovo XClarity Controller Web
interface or through the command-line interface.
For information about configuring the server using Lenovo XClarity Controller, see:
http://sysmgt.lenovofiles.com/help/topic/com.lenovo.systems.management.xcc.doc/NN1ia_c_
manageserverfirmware.html
Memory configuration
Memory performance depends on several variables, such as memory mode, memory speed, memory ranks,
memory population and processor.
Chapter 4
.
System configuration
71
Summary of Contents for 5468
