manualshive.com logo in svg

Lenovo 6241, Installation And Service Manual

The Lenovo 6241 User Manual is the perfect companion for this powerful device. Find detailed instructions, tips, and troubleshooting advice in this comprehensive guide. Download the manual for free at 88.208.23.73:8080 to unlock the full potential of your Lenovo 6241 and optimize your user experience.

Share
Download
background image

Step 6.  Reconnect the cables to the adapter and to the RAID cache card.

Step 7.  Follow the instructions for replacing the PCIe I/O book for which you replaced the adapter.

Step 8.  Reconnect the power cord and any cables that you removed.

Step 9.  Turn on the peripheral devices and the server.

Step 10.  Import your RAID configuration to the replacement ServeRAID adapter as a foreign configuration. 

See the 

ServeRAID-M Software User Guide 

at https://support.lenovo.com/solutions/migr-5086126

for 

instructions.

Removing the N2215 SAS/SATA Host Bus Adapter for System x

User this information for instructions on how to remove the N2215 SAS/SATA Host Bus Adapter.

To remove the N2215 SAS/SATA Host Bus Adapter, complete the following steps:

Step 1.  Before you begin, read “Safety” on page v and “Installation guidelines” on page 44 .

Step 2.  Turn off the server (see “Turning off the server” on page 40) and all attached peripheral devices. 

Disconnect all power cords; then, disconnect all external cables as necessary to replace the 
device.

Step 3.  Remove the storage book from the server (see “Removing the storage book” on page 273).

Step 4.  Disconnect the cables from the adapter that you want to remove.

Step 5.  Open the PCIe retention lever.

Step 6.  Carefully grasp the adapter by the edges and pull it out of the connector on the storage book 

board.

Step 7.  If you are instructed to return the adapter, follow all packaging instructions, and use any packaging 

materials for shipping that are supplied to you.

Replacing the N2215 SAS/SATA Host Bus Adapter for System x

User this information for instructions on how to replace the N2215 SAS/SATA Host Bus Adapter.

Note:

For additional information and notes about installing adapters, see “Installing an adapter” on page 83.

You can purchase the optional N2215 SAS/SATA Host Bus Adapter for System x. This solid state driver 
controller provides no RAID support; however, it helps to provide optimized performance for applications 
that do not need RAID support. See “Supported host bus adapters” on page 85 for more information about 
this adapter. For configuration information, see the documentation at 

http://datacentersupport.lenovo.com/

.

Attention:

Some cluster solutions require specific code levels or coordinated code updates. If the device is 

part of a cluster solution, verify that the latest level of code is supported for the cluster solution before you 
update the code.

To install the adapter, complete the following steps: 

Note:

This adapter can only be installed in the storage book.

Step 1.  Touch the static-protective package that contains the new N2215 SAS/SATA host bus adapter to 

any unpainted surface on the outside of the server; then, grasp the adapter by the top edge or 
upper corners of the adapter and remove it from the package.

Step 2.  Align the adapter so that the keys align correctly with the connector on the storage book board.

Step 3.  Insert the adapter into the connector on the storage book board until it is firmly seated. 

Attention:

Make sure that the adapter is seated correctly. Incomplete insertion might cause 

damage to the storage book board or the adapter.

Chapter 6

.

Removing and replacing components

251

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 6241

Canon ColorPASS-Z5000 Printing Manual preview
ColorPASS-Z5000
Brand: Canon Pages: 134
IBM B50 Service Manual preview
B50
Brand: IBM Pages: 198
Razberi V8 Core Manual And Getting Started Manual preview
V8
Brand: Razberi Pages: 113
US Robotics USR8700 User Manual preview
USR8700
Brand: US Robotics Pages: 156
IBM 847620U - Netfinity 3000 - 20U Hardware Maintenance Manual preview
847620U - Netfinity 3000 - 20U
Brand: IBM Pages: 270
AXIOMTEK NA-1301 Hardware Installation Manual preview
NA-1301
Brand: AXIOMTEK Pages: 55
MSI K9ND Speedster User Manual preview
K9ND Speedster
Brand: MSI Pages: 106
Supero SUPERSERVER 5014C-MT User Manual preview
SUPERSERVER 5014C-MT
Brand: Supero Pages: 112
ORiNG IDS-5042 Series User Manual preview
IDS-5042 Series
Brand: ORiNG Pages: 67
Dell Force10 MXL Blade Specifications preview
Force10 MXL Blade
Brand: Dell Pages: 2
Excito BUBBA User Manual preview
BUBBA
Brand: Excito Pages: 46
Promise Technology VTRAK M210i Product Manual preview
VTRAK M210i
Brand: Promise Technology Pages: 318
Meinberg SyncFire 1200 Manual preview
SyncFire 1200
Brand: Meinberg Pages: 55
QCT STRATOS S910 Series User Manual preview
STRATOS S910 Series
Brand: QCT Pages: 41
Sonnet xMax User Manual preview
xMax
Brand: Sonnet Pages: 18
Lantronix DSTni-XPress DR Quick Start preview
DSTni-XPress DR
Brand: Lantronix Pages: 2
Miranda Xmedia Server Configuration Manual preview
Xmedia Server
Brand: Miranda Pages: 266
Silicon Graphics SGI 1200 Series Quick Start Manual preview
SGI 1200 Series
Brand: Silicon Graphics Pages: 64

Brands by name

Popular brands

Load more brands