manualshive.com logo in svg

Lenovo 6241, Installation And Service Manual

The Lenovo 6241 User Manual is the perfect companion for this powerful device. Find detailed instructions, tips, and troubleshooting advice in this comprehensive guide. Download the manual for free at 88.208.23.73:8080 to unlock the full potential of your Lenovo 6241 and optimize your user experience.

Share
Download
background image

• 

PCI Express Gen3 adapter capabilities

The server provides up to twelve PCIe Gen3 adapter slots. See “Installing an adapter” on page 83 for 
more details and information about installing adapters.

• 

Redundant connection

The dual-port and quad-port Ethernet controller provides failover capability to a redundant Ethernet 
connection with the applicable application installed. If a problem occurs with the primary Ethernet 
connection and another Ethernet adapter is installed in the server, all Ethernet traffic that is associated 
with the primary connection is automatically switched to an secondary Ethernet connection. If the 
applicable device drivers are installed, this switching occurs without data loss and without user 
intervention.

• 

Redundant cooling and optional power capabilities

The server supports up to 10 fan packs (two fans in each fan pack) with dual-motor, counter-rotating, 
speed-controlled hot-swap fans, which provide redundancy and hot-swap capability for a full 
configuration. The redundant cooling by the fans in the server enables continued operation if one of the 
fan motors fails.

The server comes with one 900-watt or one 1400-watt hot-swap power supply. The server supports a 
maximum of four 750-watt -48 volt to -60 volt dc power supplies, four 900-watt, or four 1400-watt hot- 
swap power supplies. 

For redundancy support, two or four 900-watt or 1400-watt power supplies must be installed in the server. 
Two or four 900-watt or 1400-watt power supplies enables continued operation if any of the power 
supplies fail or are taken off line. For the 750-watt -48 V dc power supply, the server only supports a four 
power-supply configuration.

• 

Remote presence and blue-screen capture features

The remote presence and blue-screen capture features are integrated functions of the integrated 
management module (IMM). The remote presence feature provides the following functions:  

–  Remotely viewing video with graphics resolutions up to 1600 x 1200 at 75 Hz, regardless of the system 

state

–  Remotely accessing the server, using the keyboard and mouse from a remote client

–  Mapping the USB flash drive on a remote client, and mapping ISO and diskette image files as virtual 

drives that are available for use by the server

–  Uploading a diskette image to the IMM memory and mapping it to the server as a virtual drive

The blue-screen capture feature captures the video display contents before the IMM restarts the server 
when the IMM detects an operating-system hang condition. A system administrator can use the blue- 
screen capture feature to assist in determining the cause of the hang condition.

See “Using the remote presence and blue-screen capture features” on page 134 for additional 
information.

• 

ServerGuide Setup and Installation 

DVD

The Lenovo 

ServerGuide™ Setup and Installation 

DVD, which you can download from the web, provides 

programs to help you set up the server and install a Windows operating system. The ServerGuide program 
detects installed optional hardware devices and provides the correct configuration programs and device 
drivers. For more information about the 

ServerGuide Setup and Installation 

DVD, see “Using the 

ServerGuide Setup and Installation DVD” on page 121.

• 

ServeRAID support 

A ServeRAID™ adapter provides hardware redundant array of independent disks (RAID) support to create 
configurations. The server comes with an integrated RAID controller, which provides RAID levels 0, 1 and 
10. Additional optional RAID adapters, RAID cache cards, and Features on Demand software RAID are 
available for RAID levels 5, 6, 50, and 60 upgrade.

• 

Service Advisor

Chapter 1

.

The Lenovo System x3850 X6 and x3950 X6 Type 6241 server

15

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 6241

B&B Electronics Vlinx VESP211 Manual preview
Vlinx VESP211
Brand: B&B Electronics Pages: 67
Vecow ECS-9210 User Manual preview
ECS-9210
Brand: Vecow Pages: 122
ImageTech printWiFi User Manual preview
printWiFi
Brand: ImageTech Pages: 44
Compaq 244857-001 - TaskSmart - C4000 Model 60_duplicate Specification preview
244857-001 - TaskSmart - C4000 Model 60_duplicate
Brand: Compaq Pages: 9
W&T Com-Server++ Manual preview
Com-Server++
Brand: W&T Pages: 228
Compaq AlphaServer ES45 1B Owner'S Manual preview
AlphaServer ES45 1B
Brand: Compaq Pages: 322
MAXDATA PLATINUM 1500 IR M5 User Manual preview
PLATINUM 1500 IR M5
Brand: MAXDATA Pages: 44
Supero SUPERSERVER 5015M-NT User Manual preview
SUPERSERVER 5015M-NT
Brand: Supero Pages: 134
Hitachi F1500 Hardware Manual preview
F1500
Brand: Hitachi Pages: 208
Hitachi AMS 2500 Getting Started Manual preview
AMS 2500
Brand: Hitachi Pages: 36
SpectraLink DECT Server 2500 Interoperability Manual preview
DECT Server 2500
Brand: SpectraLink Pages: 27
QNAP TBS-464 User Manual preview
TBS-464
Brand: QNAP Pages: 49
Z Microsystems ZX3 User Manual preview
ZX3
Brand: Z Microsystems Pages: 22
McIntosh MS750 Service Manual preview
MS750
Brand: McIntosh Pages: 12
McIntosh MS750 Owner'S Manual preview
MS750
Brand: McIntosh Pages: 52
Viavi G4-PT-010-8T Hardware Installation preview
G4-PT-010-8T
Brand: Viavi Pages: 4
Polycom ReadiManagerSE200 Brochure preview
ReadiManagerSE200
Brand: Polycom Pages: 4
Black Box LWS401A User Manual preview
LWS401A
Brand: Black Box Pages: 22

Brands by name

Popular brands

Load more brands