manualshive.com logo in svg

Lenovo 6241, Installation And Service Manual

The Lenovo 6241 User Manual is the perfect companion for this powerful device. Find detailed instructions, tips, and troubleshooting advice in this comprehensive guide. Download the manual for free at 88.208.23.73:8080 to unlock the full potential of your Lenovo 6241 and optimize your user experience.

Share
Download
background image

The server comes with the Service Advisor feature that can collect data about the system when the 
system detects a fault and sends that data to Lenovo Service for problem determination. It also includes 
the call home feature that automatically calls Lenovo Service when a problem occurs. The Service Advisor 
feature is integrated into the Integrated Management Module II (IMM2). For more information about 
Service Advisor, see “Service Advisor feature” on page 167.

• 

Systems-management capabilities

The server comes with an integrated management module II (IMM2). When the IMM is used with the 
systems-management software that comes with the server, you can manage the functions of the server 
locally and remotely. The IMM also provides system monitoring, event recording, and network alert 
capability. The systems-management connector on the rear of the server is dedicated to the IMM. The 
dedicated systems-management connector provides additional security by physically separating the 
management network traffic from the production network. You can use the Setup utility to configure the 
server to use a dedicated systems-management network or a shared network.

• 

TCP/IP offload engine (TOE) support

The Ethernet controllers in the server support TOE, which is a technology that offloads the TCP/IP flow 
from the microprocessor and I/O subsystem to increase the speed of the TCP/IP flow. When an operating 
system that supports TOE is running on the server and TOE is enabled, the server supports TOE 
operation. See the operating-system documentation for information about enabling TOE.  

Note: 

As of the date of this document, the Linux operating system does not support TOE. 

• 

UEFI-compliant server firmware

The UEFI firmware offers several features, including Unified Extensible Firmware Interface (UEFI) version 
2.1 compliance, Active Energy Management (AEM) technology, enhanced reliability, availability, and 
serviceability (RAS) capabilities, and basic input/output system (BIOS) compatibility support. UEFI 
replaces the BIOS and defines a standard interface between the operating system, platform firmware, and 
external devices. The server is capable of booting UEFI-compliant operating systems, BIOS-based 
operating systems, and BIOS-based adapters as well as UEFI-compliant adapters. For more information 
about UEFI-compliant firmware, go to https://support.lenovo.com/us/en/solutions/ht103672.  

Note:

The server does not support DOS.

• 

VMware ESXi embedded hypervisor

An optional USB flash device with VMware ESXi embedded hypervisor software is available for purchase. 
Hypervisor is virtualization software that enables multiple operating systems to run on a host system at the 
same time. Install the USB flash device in the USB embedded hypervisor flash device connector on the 
standard I/O book (see “Standard I/O book” on page 31 for the location of the USB flash device 
connector). See “Using the embedded hypervisor software” on page 138 for more information about 
enabling the hypervisor software.

• 

Lenovo XClarity Administrator

Lenovo XClarity Administrator is a centralized resource-management solution that enables administrators 
to deploy infrastructure faster and with less effort. The solution seamlessly integrates into System x, 
ThinkServer, and NeXtScale servers, as well as the Flex System converged infrastructure platform. 

Lenovo XClarity Administrator provides: 

–  Automated discovery

–  Agent-free hardware management

–  Monitoring

–  Firmware updates and compliance

–  Pattern-based configuration management

–  Deployment of operating systems and hypervisors

16

System x3850 X6 and x3950 X6 Installation and Service Guide

Summary of Contents for 6241







































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 6241

IBM Enterprise Server S80 User Manual preview
Enterprise Server S80
Brand: IBM Pages: 282
NEC Express 5800 Series User Manual preview
Express 5800 Series
Brand: NEC Pages: 90
ICP DAS USA PDS-220F Series User Manual preview
PDS-220F Series
Brand: ICP DAS USA Pages: 94
B&B Electronics Serial Servers Vlinx VESR9xx Instruction Manual preview
Serial Servers Vlinx VESR9xx
Brand: B&B Electronics Pages: 61
Supermicro SuperServer E102-9W-C User Manual preview
SuperServer E102-9W-C
Brand: Supermicro Pages: 103
Digital Equipment DECserver 90TL Owner'S Manual preview
DECserver 90TL
Brand: Digital Equipment Pages: 73
Pathos Acoustics Musiteca Operating Instructions Manual preview
Musiteca
Brand: Pathos Acoustics Pages: 26
Icy Box IB-NAS902 User Manual preview
IB-NAS902
Brand: Icy Box Pages: 17
Docomo L-02A Instruction Manual preview
L-02A
Brand: Docomo Pages: 61
Digi PortServer CM User Manual preview
PortServer CM
Brand: Digi Pages: 126
dallmeier VideoNetBox Manual preview
VideoNetBox
Brand: dallmeier Pages: 12
Hawking HWPS1UG Specification Sheet preview
HWPS1UG
Brand: Hawking Pages: 2
Hawking HMPS1U User Manual preview
HMPS1U
Brand: Hawking Pages: 37
Black Box LES2700A-SSS Specifications preview
LES2700A-SSS
Brand: Black Box Pages: 3
Comtrol DeviceMaster LT User Manual preview
DeviceMaster LT
Brand: Comtrol Pages: 136
IBM 220 Service Manual preview
220
Brand: IBM Pages: 68
IBM 206m - eServer xSeries - 8485 User Manual preview
206m - eServer xSeries - 8485
Brand: IBM Pages: 92
Measy Mini PC User Manual preview
Mini PC
Brand: Measy Pages: 15

Brands by name

Popular brands

Load more brands