Chapter 1.
1-2
Notice for use
To set up your monitor, please see the illustrations below.
Note:
Do not touch the screen of monitor, which can be damaged easily by rub or pressure
because it is made of glass.
1.
2. Assemble the bracket on the base and tighten the screws on the base.
3. Assemble the bracket base on the back of the monitor, align the screw hole and tighten the screw.
Notes:
To install a VESA mount, please see "Wall Mounting (Optional)" on page 2-9.
Don’t press hard screen(screen arch up).
Put your monitor with the screen face down on a soft flat surface.