Chapter 3.Reference information
This section contains monitor specifications, instructions to manually install the monitor
driver, troubleshooting information.
Monitor specifications
Table 3-1. Monitor specifications for type-model A20270QT0/T27hv-20/62A9-GAR1-WW
Dimensions
Depth
208 mm (8.19 in.)
Height
473.6mm (18.65 in.)
Width
613.6 mm (24.16 in.)
Stand
Tilt
Range: -5
o
~35
o
VESA mount
Supported
100 mm x 100 mm (3.94 in. x 3.94 in.)
Image
Viewable image size
685 mm (27 in.)
Maximum height
608.6 mm (23.96 in.)
Maximum width
613.6 mm (24.15 in.)
Pixel pitch
0.2331mm (0.01 in.)
Power input
Supply voltage
Max supply current
100-240V AC
1.5A
Power consumption
Note:
Power
consumption figures
are for the monitor
and the power supply
combined.
Note:
Typical power
consumption is tested
under OSD default
setting.
Normal operation
<148 W (Max)
<25 W (Typical)
Standby/Suspend
<0.5 W
Off
<0.3 W at 100VAC and 240VAC
DP
Interface
DP
Input signal
VESA TMDS (Panel Link™)
Horizontal addressability
2560 pixels (max)
Vertical addressability
1440 lines (max)
Clock frequency
300 MHz (max)
HDMI
Interface
HDMI
Input signal
VESA TMDS (Panel Link™)
Horizontal addressability
2560 pixels (max)
Vertical addressability
1440 lines (max)
Clock frequency
300 MHz (max)
3-1 T27hv-20 Flat Panel Monitor User’s Guide
