background image

Appendix B.      

 B-1

 

Appendix B. Notices

Lenovo may not offer the products,  services,  or features discussed in this document in all 
countries. Consult your local Lenovo representative for information on the products and 
services currently available in your area. Any reference to a Lenovo product,  program,  or 
service is not intended to state or imply that only that Lenovo product,  program,  or service 
may be used. Any functionally equivalent product,  program,  or service that does not infringe 
any Lenovo intellectual property right may be used instead.
However,  it is the user 's responsibility to evaluate and verify the operation of any other 
product,  program,  or service.

Lenovo may have patents or pending patent applications covering subject matter described in 
this document. The furnishing of this document does not give you any license to these patents. 

You can send license inquiries,  in writing,  to:

Lenovo (United States), Inc.
1009 Think Place - Building One
Morrisville, NC 27560
U.S.A.
Attention: Lenovo Director of Licensing

LENOVO PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY 
KIND,  EITHER EXPRESS OR IMPLIED,  INCLUDING,  BUT NOT LIMITED TO,  THE 
IMPLIED WARRANTIES OF NON-INFRINGEMENT,  MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of 
express or implied warranties in certain transactions,  therefore,  this statement may not apply 
to you.

This information could include technical inaccuracies or typographical errors. Changes are 
periodically made to the information herein; these changes will be incorporated in new editions 
of the publication. Lenovo may make improvements and/or changes in the product(s) and/or 
the program(s) described in this publication at any time without notice.

The products described in this document are not intended for use in implantation or other life 
support applications where malfunction may result in injury or death to persons. The 
information contained in this document does not affect or change Lenovo product 
specifications or warranties. Nothing in this document shall operate as an express or implied 
license or indemnity under the intellectual property rights of Lenovo or third parties. All 
information contained in this document was obtained in specific environments and is presented 
as an illustration. The result obtained in other operating environments may vary.

Lenovo may use or distribute any of the information you supply in any way it believes 
appropriate without incurring any obligation to you.

Any references in this publication to non-Lenovo Web sites are provided for convenience only 

and do not in any manner serve as an endorsement of those Web sites. The materials at those 
Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at 
your own risk.

Any performance data contained herein was determined in a controlled environment. 

Therefore, the result obtained in other operating environments may vary significantly. Some 

measurements may have been made on development-level systems and there is no guarantee 

that these measurements will be the same on generally available systems. Furthermore, some 

measurements may have been estimated through extrapolation. Actual results may vary. Users 

of this document should verify the applicable data for their specific environment.

Summary of Contents for 65E0-K


































Reviews: