Part number information
The part numbers to order the switch and additional options are shown in Table 1.
Table 1. Part numbers and feature codes for ordering
Description
Part number
Feature code for
MTM 7309-HCK
Feature code for
MTM 7309-HCM
Switch
RackSwitch G8264CS (Rear to Front)
7309DRX
A3FL
None
RackSwitch G8264CS (Front to Rear)
7309DFX
None
A3FM
Miscellaneous options
Console Cable Kit Spare
90Y9462
A2MG
A2MG
Adjustable 19" 4 Post Rail Kit
00D6185
A3KP
A3KP
Recessed 19" 4 Post Rail Kit
00CG089
None
A51M
Switch Seal Kit
00Y3001
None
A4WX
iDataPlex Rail Kit
90Y3535
None
A1SZ
Air Inlet Duct for 483 mm RackSwitch
00D6060
A3KQ
None
Hot-Swappable, Rear-to-Front 750W CFF Power Supply
Spare
00D5858
A2X7
None
Hot-Swappable, Front-to-Rear 550W CFF Power Supply
Spare
00D5961
None
A3FN
Hot-Swappable, Rear-to-Front Fan Assembly Spare
00D6071
A54K
None
Hot-Swappable, Front-to-Rear Fan Assembly Spare
00D6073
None
A54J
The part numbers for the G8264CS switches include the following items:
One RackSwitch G8264CS with two power supplies and four fan assemblies (rear-to-front airflow or front-to-
rear airflow)
Generic Rack Mount Kit (2-post)
Console Cable Kit that includes:
RJ-45 (plug) to RJ-45 (plug) serial cable (1 m)
Mini-USB to RJ-45 (jack) adapter cable (0.2 m) with retention clip
DB-9 to RJ-45 (jack) adapter
Warranty Flyer
Important Notices Flyer
Documentation CD-ROM
Note: Power cables are not included and must be ordered separately (see Table 2 for details).
The G8264CS switch supports up to two redundant hot-swap 550 W AC power supplies for front-to-rear air flow or
750 W AC power supplies for rear-to-front air flow (two power supplies come standard with the switch) and up to
four redundant hot-swap fan assemblies (four fan assemblies come standard with the switch). Spare power supplies
and fan assemblies can be ordered, if required. Each Power Supply Spare option contains one hot-swap power
supply (rear-to-front or front-to-rear), and each Fan Assembly Spare option contains one hot-swap fan assembly
(rear-to front or front-to-rear).
The G8264CS switch also comes standard with the Console Cable Kit for management through a serial interface.
Spare serial management cables can be ordered, if required. The Console Cable Kit Spare option contains the
following items:
RackSwitch G8264CS
2
