RJ-45 (plug) to RJ-45 (plug) serial cable (1 m)
Mini-USB to RJ-45 (jack) adapter cable (0.2 m) with retention clip
DB-9 to RJ-45 (jack) adapter
The G8264CS switch supports optional adjustable 19-inch, 4-post rack installation kit, part number 00D6185.
Optionally, Air Inlet Duct, part number 00D6060, can be ordered with the G8264CS (rear-to-front airflow) switch for
4-post rack installations with the Adjustable 4-post Rail Kit (00D6185).
The G8264CS (front-to-rear airflow) switch also supports optional recessed 19-inch, 4-post rack kit (00CG089)
together with the Switch Seal Kit (00Y3001) that are used when the switch is installed in the Intelligent Cluster™
Rack (MT 1410), Enterprise Rack (MT 9363), or PureFlex® System Rack (MT 9363) with NeXtScale™ System. The
G8264CS (front-to-rear airflow) switch also supports 4-post iDataPlex® rack kit (90Y3535) which is used when the
switch is installed in the iDataPlex Rack.
The G8264CS switch ships standard without any AC power cables. Table 2 lists the part numbers and feature codes
to order the power cables (two power cables are required per switch).
Table 2. Power cables
Description
Part number
Feature code for
MTM 7309-HCK and
7309-HCM
Rack power cables
1.5m, 10A/100-250V, C13 to IEC 320-C14 Rack Power Cable
39Y7937
6201
2.8m, 10A/100-250V, C13 to IEC 320-C20 Rack Power Cable
39Y7938
6204
4.3m, 10A/100-250V, C13 to IEC 320-C14 Rack Power Cable
39Y7932
6263
Country-specific power cords
European 10A line C13 to CEE 7/7 (2.8M)
39Y7917
6212
Denmark 10A line C13 to DK2-5A (2.8M)
39Y7918
6213
Switzerland 10A line C13 to SEV 1011 (2.8M)
39Y7919
6216
Israel 10A line C13 to SI 32 (2.8M)
39Y7920
6218
South Africa 10A line C13 to SABS 164/1 (2.8M)
39Y7922
6214
United Kingdom 10A line C13 to BS 1363 (2.8M)
39Y7923
6215
Australia/NZ 10A line C13 to SAA-AS C112 (2.8M)
39Y7924
6211
Korea 7A line C13 to KETI 15A/250V (2.8M)
39Y7925
6219
India 6A line C13 to Fig 68 (2.8M)
39Y7927
6269
China 6A line C13 to GB 2099.1 (2.8M)
39Y7928
6210
Brazil 10A line C13 to NBR 6147 (2.8M)
39Y7929
6223
Argentina 10A line C13 to IRAM 2063 (2.8M)
39Y7930
6222
10A/250V C13 to NEMA 6-15P 2.8m power cord
46M2592
A1RF
Japan 10A/100V C13 to JIS C-8303 2.8m power cord
46M2593
A1RE
Supported cables and transceivers
With the flexibility of the G8264CS switch, clients can take advantage of the technologies that they require for
multiple environments:
For 1 GbE links, clients can use RJ-45 UTP cables up to 100 m with 1000BASE-T SFP transceivers. Clients
that need longer distances can leverage the 1000BASE-SX SFP transceivers, which can drive distances up to
RackSwitch G8264CS
3
