Table 3. Events organized by severity (continued)
Event ID
Message String
Severity
FQXSFPU0023I
Secure Boot Image Verification Failure has been cleared as no failure
in this round boot.
Informational
FQXSFPU4034I
TPM Firmware recovery is finished, rebooting system to take effect.
Informational
FQXSFPU4038I
TPM Firmware recovery successful.
Informational
FQXSFPU4041I
TPM Firmware update is in progress. Please DO NOT power off or
reset system.
Informational
FQXSFPU4042I
TPM Firmware update is finished, rebooting system to take effect.
Informational
FQXSFPU4044I
The current TPM firmware version could not support TPM version
toggling.
Informational
FQXSFPU4046I
TPM Firmware will be updated from TPM1.2 to TPM2.0.
Informational
FQXSFPU4047I
TPM Firmware will be updated from TPM2.0 to TPM1.2.
Informational
FQXSFPU4049I
TPM Firmware update successful.
Informational
FQXSFPU4080I
Host Power-On password has been changed.
Informational
FQXSFPU4081I
Host Power-On password has been cleared.
Informational
FQXSFPU4082I
Host Admin password has been changed.
Informational
FQXSFPU4083I
Host Admin password has been cleared.
Informational
FQXSFPU4084I
Host boot order has been changed.
Informational
FQXSFPU4085I
Host WOL boot order has been changed.
Informational
FQXSFSM0007I
The XCC System Event log (SEL) is full.
Informational
FQXSFSR0002I
[arg1] GPT corruption recovered, DiskGUID: [arg2]
Informational
FQXSFDD0001G
DRIVER HEALTH PROTOCOL: Missing Configuration. Requires
Change Settings From F1.
Warning
FQXSFDD0002M
DRIVER HEALTH PROTOCOL: Reports 'Failed' Status Controller.
Warning
FQXSFDD0003I
DRIVER HEALTH PROTOCOL: Reports 'Reboot' Required Controller.
Warning
FQXSFDD0005M
DRIVER HEALTH PROTOCOL: Disconnect Controller Failed. Requires
'Reboot'.
Warning
FQXSFDD0006M
DRIVER HEALTH PROTOCOL: Reports Invalid Health Status Driver.
Warning
FQXSFDD0007G
Security Key Lifecycle Manager (SKLM) IPMI Error.
Warning
FQXSFPU0021G
Hardware physical presence is in asserted state.
Warning
FQXSFPU0022G
The TPM configuration is not locked.
Warning
FQXSFPU0023G
Secure Boot Image Verification Failure Warning.
Warning
FQXSFPU4033F
TPM Firmware recovery is in progress. Please DO NOT power off or
reset system.
Warning
FQXSFPU4035M
TPM Firmware recovery failed. TPM chip may be damaged.
Warning
FQXSFPU4040M
TPM selftest has failed.
Warning
FQXSFPU4043G
TPM Firmware update aborted. System is rebooting...
Warning
126
ThinkSystem SR250 Messages and Codes Reference
Summary of Contents for 7Y51
