Diagnostic Error Code
FRU/Action
170-0XX-XXX
Voltage Sensor(s) failure
1.
Flash system
2.
System board
170-195-XXX
Voltage Sensor(s) Test aborted by user
Information only
Re-start the test, if necessary
170-196-XXX
Voltage Sensor(s) test halt, error threshold
exceeded
1.
Press F3 to review the log file
2.
Re-start the test to reset the log file
170-197-XXX
Voltage Sensor(s) test warning
1.
Make sure the component that is called
out is connected and/or enabled. See
Chapter 6, “Using the Setup Utility,” on
page 53
2.
Re-run test
3.
Replace the component that is called out
in warning statement
4.
Replace the component under test
170-198-XXX
Voltage Sensor(s) test aborted
1.
If a component is called out, make sure
it is connected and/or enabled. See
Chapter 6, “Using the Setup Utility,” on
page 53
2.
Flash the system and re-test. See “Flash
update procedures” on page 516
3.
Go to “Undetermined problems” on page
88
170-199-XXX
Voltage Sensor(s) test failed, cause unknown
1.
See “Undetermined problems” on page
88
2.
Flash the system and re-test. See “Flash
update procedures” on page 516
3.
Replace component under function test
170-250-XXX
170-251-XXX
Voltage Sensor(s) Voltage limit error
1.
Power supply
2.
System board
170-254-XXX
Voltage Sensor(s) Voltage Regulator Module
error
1.
Voltage Regulator Module (VRM)
2.
Microprocessor
3.
System board
175-000-XXX
Thermal Sensor(s) Test Passed
No action
175-0XX-XXX
Thermal Sensor(s) failure
1.
Flash system
2.
System board
175-195-XXX
Thermal Sensor(s) Test aborted by user
Information only
Re-start the test, if necessary
175-196-XXX
Thermal Sensor(s) test halt, error threshold
exceeded
1.
Press F3 to review the log file
2.
Re-start the test to reset the log file
76
Hardware Maintenance Manual
Summary of Contents for 821532U - ThinkCentre M52 - 8215
