imm_external_ip
The external IMM LAN IP address. There is no default value. This parameter is required.
imm_user_id
The IMM
account
(1 of 12 accounts). The default value is USERID.
imm_password
The IMM account password (1 of 12 accounts). The default value is PASSW0RD (with a zero
0 not an O).
The following commands are examples of using the userid and password default values and not
using the default values:
Example that does not use the userid and password default values:
asu set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value> host <imm_ip>
user <user_id> password <password>
Example that does use the userid and password default values:
asu set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value> host <imm_ip>
• Bootable media:
You can also build a bootable media using the applications available through the ToolsCenter
website at http://www.ibm.com/ support/entry/portal/docdisplay? brand=5000008&lndocid=
TOOL-CENTER. From the
IBM ToolsCenter
page, scroll down for the available tools.
Step 5. Restart the server.
Updating the DMI/SMBIOS data
The Desktop Management Interface (DMI) must be updated when the system board is replaced.
Use the Advanced Settings Utility to update the DMI in the UEFI-based server. The ASU is an online tool that
supports several operating systems. Make sure that you download the version for your operating system.
You can download the ASU from the IBM website. To download the ASU and update the DMI, complete the
following steps.
Note:
Changes are made periodically to the IBM website. The actual procedure might vary slightly from what
is described in this document.
Step 1.
Download the Advanced Settings Utility (ASU):
a. Go to http://www.ibm.com/supportportal/.
b. Click on the
Downloads
tab at the top of the panel.
c. Under
ToolsCenter
, select
View ToolsCenter downloads
.
d. Select
Advanced Settings Utility (ASU)
.
e. Scroll down and click on the link and download the ASU version for your operating system.
Step 2. ASU sets the DMI in the Integrated Management Module (IMM). Select one of the following
methods to access the IMM to set the DMI:
• Online from the target system (LAN or keyboard console style (KCS) access)
• Remote access to the target system (LAN based)
• Bootable media containing ASU (LAN or KCS, depending upon the bootable media)
Step 3. Copy and unpack the ASU package, which also includes other required files, to the server. Make
sure that you unpack the ASU and the required files to the same directory. In addition to the
application executable (asu or asu64), the following files are required:
• For Windows based operating systems:
18
BladeCenter HS23 Blade ServerProblem Determination and Service Guide
Summary of Contents for BladeCenter HS23 1929
