Lenovo E41-10/E41-15
51
Figure 9. Removal steps of system board (continued)
Detach touch pad connector in the direction shown by arrow
.
When installing:
Make sure that all the connectors are attached firmly.
Remove the system board in the direction shown by arrow
.
When installing:
When attaching the system board to the base cover, adjust the
placement of the USB, RJ-45, HDMI ports as shown in
, and make sure
that they are attached to the holes on the base cover as shown. Improper
placement of those jacks might cause a damage.
e
e
f
f
a
b
c