35
ideapad 720S-14IKB
Note: Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several
kinds. When you replace the base cover, you need to apply the following
labels:
The following labels need to be peeled off from the old base cover and put
on the new base cover.
a
GML label
b
CNC label for Argentina (68 x 6 mm) or ADT label for Argentina
(65 x 20 mm)
c
MCMC label for Malaysia (8 x 8 mm)
d
BT label for US/CA/TW or WLAN label for US/CA/TW (32 x 10 mm)
e
KR KCC label (43 x 24 mm)
f
Indonesia D side label (26 x 10 mm) or Indonesia postel label
(15 x 10 mm)
g
BIS label for India (40 x 10 mm)
h
BT label for Israel or WLAN label for Israel (32 x 10 mm)
i
BRAZIL BT or WLAN label for Brazil (35 x 15 mm)
j
WLAN label for South Africa (20 x 10 mm)
k
QR code label for China
For some models, you also need to apply one or two FCC labels. Check the
old base cover; if it has one or two FCC labels, find duplicates of them in the
label kit and apply them to the new base cover.
For the location of each label, refer to the following figure:
a
b
c
d
e
f
h
g
i
j
c
k
