36
ideapad 720S-14IKB Hardware Maintenance Manual
1020 Battery pack
For access, remove this FRU:
• “1010 Base cover” on page 34
DANGER
Only use the battery specified in the parts list for your computer. Any other battery
could ignite or explode.
Figure 2. Removal steps of battery pack
Remove the screws
1
, then disconnect the battery connector
2
.
a
a
a
b
Step
Screw (quantity)
Color
Torque
2
M2 × 4 mm, flat-head, nylok-coated (3)
Bty to Upper
Silver
1.85 +/- 0.15 kgf-cm
Lift up and remove the battery.
When installing:
Make sure that the battery connector is attached firmly.