39
ideapad 720S-14IKB
1040 SSD Card (On select models)
For access, remove these FRUs in order:
• “1010 Base cover” on page 34
• “1020 Battery pack” on page 36
Figure 4. Removal steps of SSD Card
Remove the screw
1
, and then remove the SSD card in the direction shown by
arrow
2
.
a
b
Step Screw (quantity)
Color Torque
1
M2 × 2.5 mm, flat-head, nylok-coated (1)
SSD card to Upper
Black
1.85 +/- 0.15kgfcm
When installing:
Make sure that the SSD mylar is attached to the SSD card as
shown below. Improper placement of the mylar might cause short circuit to
the system board.