40
ideapad 720S-14IKB Hardware Maintenance Manual
1050 DIMM
For access, remove these FRUs in order:
• “1010 Base cover” on page 34
• “1020 Battery pack” on page 36
Figure 5. Removal steps of DIMM
Insert your fingertips into the memory module cover, and then remove the
memory module cover manually.
Release the two latches on both edges of the socket at the same time in the
directions shown by arrows
1
, and then unplug the DIMM in the direction
shown by arrow
2
.
a
a
b
When installing:
Insert the notched end of the DIMM into the socket. Push the
DIMM firmly, and pivot it until it snaps into place. Make sure that it is firmly fixed
in the slot and is difficult to move.
