Lenovo IdeaPad U510 Hardware Maintenance Manual
54
1120 LCD unit
For access, remove these FRUs in order:
• “1010 Keyboard” on page 34
• “1020 Battery pack” on page 36
• “1030 Dummy card” on page 40
• “1040 Hard disk drive” on page 41
• “1050 Optical drive” on page 43
• “1060 PCI Express Mini Card for wireless LAN/WAN” on page 44
• “1070 SSD Card” on page 46
• “1080 Low-frame module” on page 47
• “1090 Fan assembly and Heat Sink assembly” on page 49
• “1100 DIMM” on page 50
• “1110 System board” on page 51
Figure 12. Removal steps of LCD unit
Remove four screws
.
When installing:
• Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
• Make sure that the LCD connector is attached firmly and make sure that you
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
Step
Screw (quantity)
Color
Torque
M2.5 × 4 mm, flat-head, nylok-coated
Black
2.5 kgfcm
a
a
a
a
a
a
