37
Lenovo IdeaPad Y560
FRU replacement notices
This section presents notices related to removing and replacing parts. Read
this section carefully before replacing any FRU.
Screw notices
Loose screws can cause a reliability problem. In the Lenovo IdeaPad computer,
this problem is addressed with special nylon-coated screws that have the
following characteristics:
They maintain tight connections.
•
They do not easily come loose, even with shock or vibration.
•
They are harder to tighten.
•
Each one should be used only once.
•
Do the following when you service this machine:
Keep the screw kit (for the P/N, see
•
“Miscellaneous parts” on page 101) in
your tool bag.
Always use new screws.
•
Use a torque screwdriver if you have one.
•
Tighten screws as follows:
Plastic to plastic
•
Turn an additional 90° after the screw head touches the surface of the
plastic part:
more than 90°
(Cross-section)
Logic card to plastic
•
Turn an additional 180° after the screw head touches the surface of the
logic card:
more than 180°
(Cross-section)
Torque driver
•
If you have a torque screwdriver , refer to the “Torque” column for each step.
Make sure that you use the correct screws. If you have a torque screwdriver,
•
tighten all screws firmly to the torque shown in the table.
Never use a
screw that you removed. Use a new one. Make sure that all screws are
tightened firmly.
Ensure torque screwdrivers are calibrated correctly following country
•
specifications.
