48
IdeaPad Y560 Hardware Maintenance Manual
1060 DIMM
For access, remove this FRU in order:
•
“1010 Battery pack” on page 42
•
“1050 Thermal slot cover” on page 47
Figure 6. Removal steps of DIMM
Release the two latches on both edges of the socket at the same time in the
direction shown by arrows
1
, and then unplug the DIMM in the direction shown
by arrow
2
.
1
1
2
Note:
If only one DIMM is used on the computer you are servicing, the card
must be installed in SLOT-0 (
a
: lower slot), but not in SLOT-1 (
b
: upper
slot).
a
b
When installing:
Insert the notched end of the DIMM into the socket. Push the
DIMM firmly, and pivot it until it snaps into the place. Make sure that it is firmly
fixed in the slot and difficult to be moved.
