43
Lenovo Legion Y530-15ICH
1090 DIMM
For access, remove these FRUs in order:
• “1010 Base cover” on page 32
• “1020 Battery pack” on page 34
Figure 9. Removal steps of DIMM
Carefully remove the DIMM EMI shielding
1
.
1
Release the two latches on both edges of the socket at the same time in the
directions shown by arrows
2
, and then unplug the DIMM in the direction shown
by arrow
3
.
2
2
3
When installing:
Insert the notched end of the DIMM into the socket. Push the
DIMM firmly, and pivot it until it snaps into place. Make sure that it is firmly fixed
in the slot and is difficult to move.
Note:
When replacing the memory is completed, you need to restart the
computer after the first reboot.
