10
5. To exit and save the setting, press
or
to the exit item and press
MENU-key, or leave the monitor alone for 10 seconds.
6. When the OSD window is active, it shows the input signal timing. The
"H" Stands for the horizontal frequency and "V" stands for the vertical
frequency.
7. Press
and
during the power switch on.The OSD menu will be
displayed rotated by 90°, and reapeat this action, the display will come
back the factory mode.
亮度和? 比度
位置? 整
? ? ? ?
? 言? ?
OSD
? 示? ?
色? ? 整
OSD
位置
退出菜?
恢复出厂模式
Figure 5 English OSD Message Figure 6 Chinese OSD Message
The description for function control LEDS
1. BRIGHTNESS & CONTRAST
1.1 BRIGHTNESS
Adjust the picture brightness.
1.2 CONTRAST
Adjust the picture contrast.
2. ADJUST POSITION
2.1 HORIZONTAL POSITION
Adjust the horizontal position of the picture.
2.2 VERTICAL POSITION
Adjust the vertical position of the picture.
3. VIDEO NOISE
3.1 FOCUS
Adjust the picture Focus.
3.2 CLOCK
Adjust the picture Clock.
ADJUSTING THE PICTURE
