Prefix:
PLAT
ID:
0167
User Response
No action; information only.
•
816f010d-040cffff : The Drive [StorageVolumeElementName] has been enabled. (1U Storage HDD7)
This message is for the use case when an implementation has detected a Drive was Enabled.
May also be shown as 816f010d040cffff or 0x816f010d040cffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
Critical - Hard Disk drive
SNMP Trap ID
5
CIM Information
Prefix:
PLAT
ID:
0167
User Response
No action; information only.
•
816f010f-2201ffff : The System [ComputerSystemElementName] has recovered from a firmware
hang. (Firmware Error)
This message is for the use case when an implementation has recovered from a System Firmware Hang.
May also be shown as 816f010f2201ffff or 0x816f010f2201ffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
Critical - Other
SNMP Trap ID
50
CIM Information
Prefix:
PLAT
ID:
0187
Appendix A. Integrated Management Module II (IMM2) error messages
459
Summary of Contents for NeXtScale nx360 M4
