manualshive.com logo in svg

Lenovo NeXtScale nx360 M4, Installation And Service Manual

The Lenovo NeXtScale nx360 M4 is an advanced server solution designed for high-performance computing. To ensure seamless setup and maintenance, an easily accessible Installation And Service Manual is available for download, free of charge, from our website. Obtain in-depth instructions and optimize your experience with this exceptional product.

Share
Download
background image

•

IBM License Agreement for Machine Code

This document is in PDF on the IBM

Documentation

CD. It

provides translated versions of the

IBM License Agreement for Machine Code

for your product.

•

Licenses and Attributions Document

This document is in PDF on the IBM

Documentation

CD. It provides

the open source notices.

•

Safety Information

This document is in PDF on the IBM

Documentation

CD. It contains translated caution

and danger statements. Each caution and danger statement that appears in the documentation has a
number that you can use to locate the corresponding statement in your language in the

Safety Information

document.

Depending on the server model, additional documentation might be included on the IBM

Documentation

CD.

The ToolsCenter for System x and BladeCenter is an online information center that contains information
about tools for updating, managing, and deploying firmware, device drivers, and operating systems. The
ToolsCenter for System x and BladeCenter is at http://publib.boulder.ibm.com/infocenter/toolsctr/v1r0/.

The server might have features that are not described in the documentation that you received with the
server. The documentation might be updated occasionally to include information about those features,
or technical updates might be available to provide additional information that is not included in the
server documentation. These updates are available from the IBM website. To check for updates, go
to http://www.ibm.com/supportportal.

Notices and statements in this document

The caution and danger statements in this document are also in the multilingual

Safety Information

document, which is on the IBM

Documentation

CD. Each statement is numbered for reference to the

corresponding statement in your language in the

Safety Information

document.

The following notices and statements are used in this document:

•

Note:

These notices provide important tips, guidance, or advice.

•

Important:

These notices provide information or advice that might help you avoid inconvenient or

problem situations.

•

Attention:

These notices indicate potential damage to programs, devices, or data. An attention notice is

placed just before the instruction or situation in which damage might occur.

•

Caution:

These statements indicate situations that can be potentially hazardous to you. A caution

statement is placed just before the description of a potentially hazardous procedure step or situation.

•

Danger:

These statements indicate situations that can be potentially lethal or extremely hazardous

to you. A danger statement is placed just before the description of a potentially lethal or extremely
hazardous procedure step or situation.

Features and specifications

Use this information to view specific information about the compute node, such as compute node hardware
features and the dimensions of the compute node.

Notes:

1. Power, cooling, and chassis systems management are provided by the IBM NeXtScale n1200 Enclosure

chassis.

2. The operating system in the compute node must provide USB support for the compute node to

recognize and use USB media drives and devices. The IBM NeXtScale n1200 Enclosure chassis uses
USB for internal communication with these devices.

4

IBM NeXtScale nx360 M4 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M4



































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NeXtScale nx360 M4

IBM Flex System x240 Compute Node Product Manual preview
Flex System x240 Compute Node
Brand: IBM Pages: 28
Oki ML590 Specification Sheet preview
ML590
Brand: Oki Pages: 2
Hi-flying HF2221 User Manual preview
HF2221
Brand: Hi-flying Pages: 29
Citrix NetScaler MPX 25100 40G Quick Start Manual preview
NetScaler MPX 25100 40G
Brand: Citrix Pages: 15
Lantech IDS-2102A User Manual preview
IDS-2102A
Brand: Lantech Pages: 49
Zenith z-server lt User Manual preview
z-server lt
Brand: Zenith Pages: 218
IBM 9123710 - eServer OpenPower 710 Introduction Manual preview
9123710 - eServer OpenPower 710
Brand: IBM Pages: 70
Supermicro SuperServer 1029U-T Series Quick Reference Manual preview
SuperServer 1029U-T Series
Brand: Supermicro Pages: 1
t.a.c. TAC Xenta 511 Handbook preview
TAC Xenta 511
Brand: t.a.c. Pages: 36
Supermicro SuperServer 2029BT-HNC0R User Manual preview
SuperServer 2029BT-HNC0R
Brand: Supermicro Pages: 148
Intergraph InterServe 90 System Setup preview
InterServe 90
Brand: Intergraph Pages: 102
HP Compaq AlphaServer DS10 Overview preview
Compaq AlphaServer DS10
Brand: HP Pages: 43
HP Cluster Platform Hardware Kits v2010 Installation Manual preview
Cluster Platform Hardware Kits v2010
Brand: HP Pages: 12
HP CB900s i4 Disassembly Instructions Manual preview
CB900s i4
Brand: HP Pages: 12
HP hpe proliant dl20 gen9 User Manual preview
hpe proliant dl20 gen9
Brand: HP Pages: 131
HP Cisco MDS 8/12c Release Note preview
Cisco MDS 8/12c
Brand: HP Pages: 44
HP Cluster Platform Installation Manual preview
Cluster Platform
Brand: HP Pages: 74
HP Cisco MDS 8/24c Release Note preview
Cisco MDS 8/24c
Brand: HP Pages: 44

Brands by name

Popular brands

Load more brands