manualshive.com logo in svg

Lenovo NeXtScale nx360 M4, Installation And Service Manual

The Lenovo NeXtScale nx360 M4 is an advanced server solution designed for high-performance computing. To ensure seamless setup and maintenance, an easily accessible Installation And Service Manual is available for download, free of charge, from our website. Obtain in-depth instructions and optimize your experience with this exceptional product.

Share
Download
background image

• ServeRAID firmware is stored in ROM on the system board and the RAID adapter (if one is installed).

• SAS/SATA firmware is stored in ROM on the SAS/SATA controller on the system board.

Configuring the server

The following configuration programs come with the server:

•

Setup utility

The Setup utility is part of the UEFI firmware. Use it to perform configuration tasks such as changing
interrupt request (IRQ) settings, changing the startup-device sequence, setting the date and time, and
setting passwords. For information about using this program, see “Using the Setup utility” on page 25.

•

Boot Manager program

The Boot Manager is part of the UEFI firmware. Use it to override the startup sequence that is set in the
Setup utility and temporarily assign a device to be first in the startup sequence. For more information
about using this program, see “Using the Boot Manager” on page 31.

•

IBM

ServerGuide Setup and Installation

CD

The ServerGuide program provides software-setup tools and installation tools that are designed for the
server. Use this CD during the installation of the server to configure basic hardware features, such as an
integrated SAS/SATA controller with RAID capabilities, and to simplify the installation of your operating
system. For information about using this CD, see “Using the ServerGuide Setup and Installation CD”
on page 23.

•

Integrated management module

Use the integrated management module II (IMM2) for configuration, to update the
firmware and sensor data record/field replaceable unit (SDR/FRU) data, and to remotely
manage a network. For information about using the IMM, see “Using the integrated
management module” on page 32 and the

Integrated Management Module II User's Guide

at

http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=migr-5086346.

•

VMware ESXi embedded hypervisor

An optional USB flash device with VMware ESXi embedded hypervisor software is available for purchase.
Hypervisor is virtualization software that enables multiple operating systems to run on a host system
at the same time. The USB embedded hypervisor flash device can be installed in USB connectors
3 and 4 on the system board. For more information about using the embedded hypervisor, see “Using
the embedded hypervisor” on page 35.

•

Remote presence capability and blue-screen capture

The remote presence and blue-screen capture features are integrated functions of the integrated
management module (IMM2). The remote presence feature provides the following functions:

– Remotely viewing video with graphics resolutions up to 1600 x 1200 at 75 Hz, regardless of the system

state

– Remotely accessing the server, using the keyboard and mouse from a remote client

– Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remote client, and mapping ISO

and diskette image files as virtual drives that are available for use by the server

– Uploading a diskette image to the IMM memory and mapping it to the server as a virtual drive

The blue-screen capture feature captures the video display contents before the IMM restarts the
server when the IMM detects an operating-system hang condition. A system administrator can use
the blue-screen capture feature to assist in determining the cause of the hang condition. For more
information, see “Using the remote presence and blue-screen capture features” on page 33.

•

Ethernet controller configuration

22

IBM NeXtScale nx360 M4 Installation and Service Guide

Summary of Contents for NeXtScale nx360 M4



































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NeXtScale nx360 M4

Ganz ZN-S1000VNE Quick Installation Manual preview
ZN-S1000VNE
Brand: Ganz Pages: 5
Buffalo HD-H0.6TGL User Manual preview
HD-H0.6TGL
Brand: Buffalo Pages: 80
Supermicro SUPERSERVER 8045C-3R User Manual preview
SUPERSERVER 8045C-3R
Brand: Supermicro Pages: 118
Nortel 297-2183-912 Installation Manual preview
297-2183-912
Brand: Nortel Pages: 144
Bosch DL380 Gen 10 AI Quick Installation Manual preview
DL380 Gen 10 AI
Brand: Bosch Pages: 18
Bosch DIP-61F0-00N Installation Manual preview
DIP-61F0-00N
Brand: Bosch Pages: 48
Bosch PRA-APAS Configuration Manual preview
PRA-APAS
Brand: Bosch Pages: 44
Panasonic AG-JJLBE20P Operating Instructions Manual preview
AG-JJLBE20P
Brand: Panasonic Pages: 17
Panasonic AJ-HDR150P Operating Instructions Manual preview
AJ-HDR150P
Brand: Panasonic Pages: 42
Panasonic KX-NSX1000 Operating Manual preview
KX-NSX1000
Brand: Panasonic Pages: 316
Panasonic KX-NSX1000 Manual preview
KX-NSX1000
Brand: Panasonic Pages: 456
TechnipFMC Proline Promass 500 Manual preview
Proline Promass 500
Brand: TechnipFMC Pages: 32
Planet FPS-1101 User Manual preview
FPS-1101
Brand: Planet Pages: 83
Meinberg LANTIME/SHS/BGT Manual preview
LANTIME/SHS/BGT
Brand: Meinberg Pages: 5
Eelectron Horizone Mini IN00M02WEB Manual preview
Horizone Mini IN00M02WEB
Brand: Eelectron Pages: 2
AirLive NAS-235 User Manual preview
NAS-235
Brand: AirLive Pages: 89
Supero A+ SERVER 1022G-URF User Manual preview
A+ SERVER 1022G-URF
Brand: Supero Pages: 95
Supero MicroCloud 5038ML-H8TRF User Manual preview
MicroCloud 5038ML-H8TRF
Brand: Supero Pages: 122

Brands by name

Popular brands

Load more brands