manualshive.com logo in svg

Lenovo NeXtScale nx360 M4, Installation And Service Manual

The Lenovo NeXtScale nx360 M4 is an advanced server solution designed for high-performance computing. To ensure seamless setup and maintenance, an easily accessible Installation And Service Manual is available for download, free of charge, from our website. Obtain in-depth instructions and optimize your experience with this exceptional product.

Share
Download
background image

Getting help and technical assistance

If you need help, service, or technical assistance or just want more information about IBM products, you will find a wide variety of
sources available from IBM to assist you.

Use this information to obtain additional information about IBM and IBM products, determine what to do if you experience a problem with
your IBM system or optional device, and determine whom to call for service, if it is necessary.

Before you call

Before you call, make sure that you have taken these steps to try to solve the problem yourself.

If you believe that you require IBM to perform warranty service on your IBM product, the IBM service technicians will be able to assist
you more efficiently if you prepare before you call.

• Check all cables to make sure that they are connected.

• Check the power switches to make sure that the system and any optional devices are turned on.

• Check for updated software, firmware, and operating-system device drivers for your IBM product. The IBM Warranty terms and

conditions state that you, the owner of the IBM product, are responsible for maintaining and updating all software and firmware for the
product (unless it is covered by an additional maintenance contract). Your IBM service technician will request that you upgrade your
software and firmware if the problem has a documented solution within a software upgrade.

• If you have installed new hardware or software in your environment, check

http://www.ibm.com/systems/info/x86servers/serverproven/compat/us to make sure that the hardware and software is supported by
your IBM product.

• Go to http://www.ibm.com/supportportal to check for information to help you solve the problem.

• Gather the following information to provide to IBM Support. This data will help IBM Support quickly provide a solution to your problem

and ensure that you receive the level of service for which you might have contracted.

– Hardware and Software Maintenance agreement contract numbers, if applicable

– Machine type number (IBM 4-digit machine identifier)

– Model number

– Serial number

– Current system UEFI and firmware levels

– Other pertinent information such as error messages and logs

• Go to http://www.ibm.com/support/entry/portal/Open_service_request to submit an Electronic Service Request. Submitting an

Electronic Service Request will start the process of determining a solution to your problem by making the pertinent information available
to IBM Support quickly and efficiently. IBM service technicians can start working on your solution as soon as you have completed
and submitted an Electronic Service Request.

You can solve many problems without outside assistance by following the troubleshooting procedures that IBM provides in the
online help or in the documentation that is provided with your IBM product. The documentation that comes with IBM systems also
describes the diagnostic tests that you can perform. Most systems, operating systems, and programs come with documentation that
contains troubleshooting procedures and explanations of error messages and error codes. If you suspect a software problem, see the
documentation for the operating system or program.

Using the documentation

Information about your IBM system and preinstalled software, if any, or optional device is available in the documentation that comes with
the product. That documentation can include printed documents, online documents, readme files, and help files.

See the troubleshooting information in your system documentation for instructions for using the diagnostic programs. The troubleshooting
information or the diagnostic programs might tell you that you need additional or updated device drivers or other software. IBM maintains
pages on the World Wide Web where you can get the latest technical information and download device drivers and updates. To access
these pages, go to http://www.ibm.com/supportportal.

Getting help and information from the World Wide Web

Up-to-date information about IBM products and support is available on the World Wide Web.

On the World Wide Web, up-to-date information about IBM systems, optional devices, services, and support is available at
http://www.ibm.com/supportportal. IBM System x information is at http://www.ibm.com/systems/x. IBM BladeCenter information is at
http://www.ibm.com/systems/bladecenter. IBM IntelliStation information is at http://www.ibm.com/systems/intellistation.

Summary of Contents for NeXtScale nx360 M4



































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for NeXtScale nx360 M4

IBM 5100 User Reference Manual preview
5100
Brand: IBM Pages: 214
IBM BladeCenter HS23 User Manual preview
BladeCenter HS23
Brand: IBM Pages: 30
IBM System x3950 X6 Product Manual preview
System x3950 X6
Brand: IBM Pages: 53
LaCie 2big Network 2 Datasheet preview
2big Network 2
Brand: LaCie Pages: 4
IBM e Server iSeries 825 Manual preview
e Server iSeries 825
Brand: IBM Pages: 52
Radware APSolute Vision Installation And Maintenance Manual preview
APSolute Vision
Brand: Radware Pages: 81
IBM HS21 XM BLADECENTER - L5408 FOR SPEC CPU2006 Supplementary Manual preview
HS21 XM BLADECENTER - L5408 FOR SPEC CPU2006
Brand: IBM Pages: 1
IBM 847620U - Netfinity 3000 - 20U Hardware Maintenance Manual preview
847620U - Netfinity 3000 - 20U
Brand: IBM Pages: 270
Thecus N12000 series User Manual preview
N12000 series
Brand: Thecus Pages: 120
IBM 88701RX User Manual preview
88701RX
Brand: IBM Pages: 98
IBM System x3500 M2 Type 7839 Installation And User Manual preview
System x3500 M2 Type 7839
Brand: IBM Pages: 126
Abit SI-2PS User Manual preview
SI-2PS
Brand: Abit Pages: 56
Sun Microsystems Ultra Enterprise 3000 Installation Manual preview
Ultra Enterprise 3000
Brand: Sun Microsystems Pages: 48
Cisco UCS C220 M4 Maintaining The Server preview
UCS C220 M4
Brand: Cisco Pages: 72
Cisco UCS C240 M3 User Manual preview
UCS C240 M3
Brand: Cisco Pages: 64
Cisco TelePresence MSE 8710 Installation Manual preview
TelePresence MSE 8710
Brand: Cisco Pages: 12
Cisco Secure Network Server 3600 Series Hardware Installation Manual preview
Secure Network Server 3600 Series
Brand: Cisco Pages: 38
Cisco UCS C220 M5 Maintaining preview
UCS C220 M5
Brand: Cisco Pages: 86

Brands by name

Popular brands

Load more brands