manualshive.com logo in svg

Lenovo System x3250 M4, Installation And Service Manual

The Lenovo System x3250 M4 is a powerful and reliable server designed for small businesses. For easy installation and maintenance, make sure to download the free Installation And Service Manual from 88.208.23.73:8080, providing step-by-step instructions and valuable information to optimize the performance and longevity of your system.

Share
Download
background image

• ServeRAID firmware is stored in ROM on the system board and the RAID adapter (if one is installed).

• SAS/SATA firmware is stored in ROM on the SAS/SATA controller on the system board.

Configuring the server

The following configuration programs come with the server:

•

Setup utility

The Setup utility is part of the UEFI firmware. Use it to perform configuration tasks such as changing
interrupt request (IRQ) settings, changing the startup-device sequence, setting the date and time, and
setting passwords. For information about using this program, see “Using the Setup utility” on page 64.

•

Boot Manager program

The Boot Manager is part of the UEFI firmware. Use it to override the startup sequence that is set in the
Setup utility and temporarily assign a device to be first in the startup sequence. For more information
about using this program, see “Using the Boot Manager” on page 70.

•

IBM

ServerGuide Setup and Installation

CD

The ServerGuide program provides software-setup tools and installation tools that are designed for the
server. Use this CD during the installation of the server to configure basic hardware features, such as an
integrated SAS/SATA controller with RAID capabilities, and to simplify the installation of your operating
system. For information about using this CD, see “Using the ServerGuide Setup and Installation CD”
on page 63.

•

Integrated management module

Use the integrated management module II (IMM2) for configuration, to update the firmware and sensor
data record/field replaceable unit (SDR/FRU) data, and to remotely manage a network. For information
about using the IMM2, see “Using the Integrated Management Module II (IMM2)” on page 71 and
the

Integrated Management Module II User's Guide

at http://publib.boulder.ibm.com/infocenter/

systemx/documentation/topic/ com.lenovo.sysx.imm2.doc/ printable_doc.html.

•

Remote presence capability and blue-screen capture

The remote presence and blue-screen capture features are integrated functions of the integrated
management module (IMM2). The remote presence feature provides the following functions:

– Remotely viewing video with graphics resolutions up to 1600 x 1200 at 75 Hz, regardless of the system

state

– Remotely accessing the server, using the keyboard and mouse from a remote client

– Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remote client, and mapping ISO

and diskette image files as virtual drives that are available for use by the server

– Uploading a diskette image to the IMM2 memory and mapping it to the server as a virtual drive

The blue-screen capture feature captures the video display contents before the IMM2 restarts the
server when the IMM2 detects an operating-system hang condition. A system administrator can use
the blue-screen capture feature to assist in determining the cause of the hang condition. For more
information, see “Using the remote presence and blue-screen capture features” on page 72.

•

Ethernet controller configuration

For information about configuring the Ethernet controller, see “Configuring the Ethernet controller” on
page 75.

•

IBM Advanced Settings Utility (ASU) program

Use this program as an alternative to the Setup utility for modifying UEFI settings and IMM2 settings. Use
the ASU program online or out of band to modify UEFI settings from the command line without the need
to restart the server to run the Setup utility. For more information about using this program, see “IBM
Advanced Settings Utility program” on page 76.

62

Lenovo System x3250 M4 Installation and Service Guide

Summary of Contents for System x3250 M4







































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for System x3250 M4

IBM HS12 - BladeCenter - 8028 Service Manual preview
HS12 - BladeCenter - 8028
Brand: IBM Pages: 204
TYAN GC68-B8036 Service Engineer'S Manual preview
GC68-B8036
Brand: TYAN Pages: 106
IBM 88743BU - System x3950 E User Manual preview
88743BU - System x3950 E
Brand: IBM Pages: 426
PRIMERGY BX600 S2 Hardware Manual preview
BX600 S2
Brand: PRIMERGY Pages: 87
Cavalry CAXA Series User Manual preview
CAXA Series
Brand: Cavalry Pages: 16
Arista NetVisor UNUM High Capacity Appliance User Manual preview
NetVisor UNUM High Capacity Appliance
Brand: Arista Pages: 81
QNAP TBS-464-8G Quick Installation Manual preview
TBS-464-8G
Brand: QNAP Pages: 16
Lightwave Communications SCS3230 System Administrator Manual preview
SCS3230
Brand: Lightwave Communications Pages: 97
Imagine NX1012DS Installation And Quick Start preview
NX1012DS
Brand: Imagine Pages: 2
ImageQuest W150 User Manual preview
W150
Brand: ImageQuest Pages: 31
Hewlett Packard Enterprise ProLiant ML350 Gen10 User Manual preview
ProLiant ML350 Gen10
Brand: Hewlett Packard Enterprise Pages: 214
Zte NetNumen U31 R06 Hardware Installation Manual preview
NetNumen U31 R06
Brand: Zte Pages: 128
Promise Technology PegasusPro R16 Product Manual preview
PegasusPro R16
Brand: Promise Technology Pages: 80
Viavi G3-GS-8P-288T Hardware Installation preview
G3-GS-8P-288T
Brand: Viavi Pages: 8
Promise Technology VessRAID 1740s Product Manual preview
VessRAID 1740s
Brand: Promise Technology Pages: 324
IBM @server iSeries User Manual preview
@server iSeries
Brand: IBM Pages: 294
Gigabyte G182-C20 User Manual preview
G182-C20
Brand: Gigabyte Pages: 108
Red Hat NETWORK SATELLITE 5.0.0 - Installation Manual preview
NETWORK SATELLITE 5.0.0 -
Brand: Red Hat Pages: 84

Brands by name

Popular brands

Load more brands