manualshive.com logo in svg

Lenovo System x3500 M4, Installation And Service Manual

The IBM System x3500 M4 Installation and User manual is available for free download on our website. This comprehensive manual provides step-by-step instructions for setting up and operating the System x3500 M4, ensuring a seamless experience for users. Visit 88.208.23.73:8080 to access this valuable resource.

Share
Download
background image

Chapter 3. Configuration information and instructions

This chapter provides information about updating the firmware and using the configuration utilities.

Updating the firmware

Use this information to update the system firmware.

Important:

1. Some cluster solutions require specific code levels or coordinated code updates. If the device is part

of a cluster solution, verify that the latest level of code is supported for the cluster solution before
you update the code.

2. Before you update the firmware, be sure to back up any data that is stored in the Trusted Platform

Module (TPM), in case any of the TPM characteristics are changed by the new firmware. For instructions,
see your encryption software documentation.

3. Installing the wrong firmware or device-driver update might cause the server to malfunction. Before you

install a firmware or device-driver update, read any readme and change history files that are provided
with the downloaded update. These files contain important information about the update and the
procedure for installing the update, including any special procedure for updating from an early firmware
or device-driver version to the latest version.

You can install code updates that are packaged as an Update

Xpress

System Pack or Update

Xpress

CD

image. An Update

Xpress

System Pack contains an integration-tested bundle of online firmware and

device-driver updates for your server. Use Update

Xpress

System Pack Installer to acquire and apply

Update

Xpress

System Packs and individual firmware and device-driver updates. For additional information

and to download the Update

Xpress

System Pack Installer, go to the ToolsCenter for System x and

BladeCenter at https://support.lenovo.com/us/en/ documents/LNVO-CENTER and click

UpdateXpress

System Pack Installer

.

When you click an update, an information page is displayed, including a list of the problems that the update
fixes. Review this list for your specific problem; however, even if your problem is not listed, installing the
update might solve the problem.

Be sure to separately install any listed critical updates that have release dates that are later than the release
date of the Update

Xpress

System Pack or Update

Xpress

image.

The firmware for the server is periodically updated and is available for download on the Lenovo website. To
check for the latest level of firmware, such as the UEFI firmware, device drivers, and Integrated Management
Module II (IMM2) firmware, go to http://www.ibm.com/support/ fixcentral.

Download the latest firmware for the server; then, install the firmware, using the instructions that are included
with the downloaded files.

When you replace a device in the server, you might have to update the firmware that is stored in memory on
the device or restore the pre-existing firmware from a CD or DVD image.

The following list indicates where the firmware is stored:

• UEFI firmware is stored in ROM on the system board.

• IMM2 firmware is stored in ROM on the system board.

• Ethernet firmware is stored in ROM on the Ethernet controller and on the system board.

© Copyright Lenovo 2014, 2016

103

Summary of Contents for System x3500 M4































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for System x3500 M4

LaCie 5big - Network NAS Server Quick Start Manual preview
5big - Network NAS Server
Brand: LaCie Pages: 9
LaCie 2big NAS Quick Install Manual preview
2big NAS
Brand: LaCie Pages: 14
SEH SEH650 Network Installation Manual preview
SEH650
Brand: SEH Pages: 5
Xantech XMUSICWP User Manual preview
XMUSICWP
Brand: Xantech Pages: 52
Cyclades Cyclades-PR4000 Installation Manual preview
Cyclades-PR4000
Brand: Cyclades Pages: 174
Altos R380 F5 User Manual preview
R380 F5
Brand: Altos Pages: 93
IBM @server xSeries 343 Product Manual preview
@server xSeries 343
Brand: IBM Pages: 193
Quatech 4-Port USB 2.0 Device Server over IP... Specifications preview
4-Port USB 2.0 Device Server over IP...
Brand: Quatech Pages: 2
Silex technology PRICOM PRICOM C- 5100 User Manual preview
PRICOM PRICOM C- 5100
Brand: Silex technology Pages: 7
TRENDnet TS-U100 - NAS Server - USB User Manual preview
TS-U100 - NAS Server - USB
Brand: TRENDnet Pages: 47
Navico SonicHub 2 Installation Manual preview
SonicHub 2
Brand: Navico Pages: 2
Cisco UCS Invicta C3124SA Manual preview
UCS Invicta C3124SA
Brand: Cisco Pages: 60
Cisco UCS X9508 Installation Notes preview
UCS X9508
Brand: Cisco Pages: 54
Cisco UCS Invicta C3124SA Installation Manual preview
UCS Invicta C3124SA
Brand: Cisco Pages: 40
Cisco UCS X9508 Installation Manual preview
UCS X9508
Brand: Cisco Pages: 132
Cisco UCS E Series Installation Manual preview
UCS E Series
Brand: Cisco Pages: 46
Cisco UCS S3260 M5 Design Manual preview
UCS S3260 M5
Brand: Cisco Pages: 35
Cisco Unity Installation Manual preview
Unity
Brand: Cisco Pages: 188

Brands by name

Popular brands

Load more brands