manualshive.com logo in svg

Lenovo System x3500 M4, Installation And Service Manual

The IBM System x3500 M4 Installation and User manual is available for free download on our website. This comprehensive manual provides step-by-step instructions for setting up and operating the System x3500 M4, ensuring a seamless experience for users. Visit 88.208.23.73:8080 to access this valuable resource.

Share
Download
background image

Note:

Changes are made periodically to the Lenovo website. The actual procedure might vary slightly

from what is described in this document.

Installing a newer version

To locate and install a newer version of Lenovo Systems Director, complete the following steps:

Step 1.

Check for the latest version of Lenovo Systems Director:

a.

Go to http://www.ibm.com/systems/software/director/resources.html.

b.

If a newer version of Systems Director than what comes with the server is shown in the
drop-down list, follow the instructions on the web page to download the latest version.

Step 2.

Install the Systems Director program.

Installing updates with your management server is connected to the Internet

If your management server is connected to the Internet, to locate and install updates and interim fixes,
complete the following steps:

Step 1.

Make sure that you have run the Discovery and Inventory collection tasks.

Step 2.

On the Welcome page of the Systems Director web interface, click

View updates

.

Step 3.

Click

Check for updates

. The available updates are displayed in a table.

Step 4.

Select the updates that you want to install, and click Install to start the installation wizard.

Installing updates with your management server is not connected to the Internet

If your management server is not connected to the Internet, to locate and install updates and interim fixes,
complete the following steps:

Step 1.

Make sure that you have run the Discovery and Inventory collection tasks.

Step 2.

On a system that is connected to the Internet, go to http://www.ibm.com/support/ fixcentral.

Step 3.

From the

Product family

list, select

IBM Systems Director

.

Step 4.

From the

Product

list, select

IBM Systems Director

.

Step 5.

From the

Installed version

list, select the latest version, and click

Continue

.

Step 6.

Download the available updates.

Step 7.

Copy the downloaded files to the management server.

Step 8.

On the management server, on the Welcome page of the Systems Director web interface, click
the

Manage

tab, and click

Update Manager

.

Step 9.

Click

Import updates

and specify the location of the downloaded files that you copied to the

management server.

Step 10. Return to the Welcome page of the Web interface, and click

View updates

.

Step 11. Select the updates that you want to install, and click

Install

to start the installation wizard.

Updating the Universal Unique Identifier (UUID)

The Universal Unique Identifier (UUID) must be updated when the system board is replaced. Use the
Advanced Settings Utility to update the UUID in the UEFI-based server.

The ASU is an online tool that supports several operating systems. Make sure that you download the version
for your operating system. You can download the ASU from the Lenovo Web site. To download the ASU and
update the UUID, complete the following steps.

120

System x3500 M4 Installation and Service Guide

Summary of Contents for System x3500 M4































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for System x3500 M4

NEC Univerge SV8100 System Maintenance Manual preview
Univerge SV8100
Brand: NEC Pages: 78
NEC Univerge SV8100 General Description Manual preview
Univerge SV8100
Brand: NEC Pages: 186
NEC Univerge SV8100 Configuration Manual preview
Univerge SV8100
Brand: NEC Pages: 150
NEC Univerge SV8100 Service Information Bulletin preview
Univerge SV8100
Brand: NEC Pages: 52
NEC Express5800/T110g-S Configuration Manual preview
Express5800/T110g-S
Brand: NEC Pages: 34
IBM Z10 BUISNESS CLASS Z10 BC Reference Manual preview
Z10 BUISNESS CLASS Z10 BC
Brand: IBM Pages: 67
IBM x3450 - System - 7948 Quick Start Manual preview
x3450 - System - 7948
Brand: IBM Pages: 2
Blackberry Enterprise Server Upgrade Manual preview
Enterprise Server
Brand: Blackberry Pages: 88
3Com 3CRWPS10075-US - OfficeConnect Wireless 54Mbps 11g Print... User Manual preview
3CRWPS10075-US - OfficeConnect Wireless 54Mbps 11g Print...
Brand: 3Com Pages: 94
RaidSonic IB-NAS4210-B Brochure & Specs preview
IB-NAS4210-B
Brand: RaidSonic Pages: 2
Advantech DVG-1100 Manual preview
DVG-1100
Brand: Advantech Pages: 43
Atop ABLELink GW21W User Manual preview
ABLELink GW21W
Brand: Atop Pages: 52
Icy Box IB-NAS902 User Manual preview
IB-NAS902
Brand: Icy Box Pages: 17
Fujitsu PRIMERGY BX620 S5 Options Manual preview
PRIMERGY BX620 S5
Brand: Fujitsu Pages: 50
Fujitsu PRIMERGY BX620 S4 Operating Manual preview
PRIMERGY BX620 S4
Brand: Fujitsu Pages: 81
Fujitsu PRIMERGY BX900 S1 Service Supplement Manual preview
PRIMERGY BX900 S1
Brand: Fujitsu Pages: 46
Fujitsu PRIMERGY BX620 S6 Options Manual preview
PRIMERGY BX620 S6
Brand: Fujitsu Pages: 56
Fujitsu Primergy BX920 S4 Operating Manual preview
Primergy BX920 S4
Brand: Fujitsu Pages: 66

Brands by name

Popular brands

Load more brands