Lenovo System x3500 M4 Installation And Service Manual Download | Manualshive

Page: 1163 / 1182

background image

To create a personalized support web page, go to http://www.ibm.com/support/ mynotifications. From this
personalized page, you can subscribe to weekly email notifications about new technical documents, search
for information and downloads, and access various administrative services.

Software service and support

Through IBM Support Line, you can get telephone assistance, for a fee, with usage, configuration, and
software problems with your Lenovo products.

For more information about Support Line and other IBM services, see http://www.ibm.com/services
or see http://www.ibm.com/planetwide for support telephone numbers. In the U.S. and Canada, call
1-800-IBM-SERV (1-800-426-7378).

Hardware service and support

IBM is Lenovo's preferred service provider for the System x, Flex System and NeXtScale System products.

You can receive hardware service through your Lenovo reseller or from IBM. To locate a reseller authorized
by Lenovo to provide warranty service, go to http://www.ibm.com/partnerworld and click

Business Partner

Locator

. For IBM support telephone numbers, see http://www.ibm.com/planetwide. In the U.S. and

Canada, call 1-800-IBM-SERV (1-800-426-7378).

In the U.S. and Canada, hardware service and support is available 24 hours a day, 7 days a week. In the
U.K., these services are available Monday through Friday, from 9 a.m. to 6 p.m.

Taiwan product service

Use this information to contact product service for Taiwan.

Appendix D. Getting help and technical assistance

1149

«
...
1161
1162
1163
1164
1165
...
»

Summary of Contents for System x3500 M4































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for System x3500 M4

ProLiant DL180 Gen10

Brand: HPE Pages: 10

BACnet/IP Server-SUNWAYS

Brand: IntesisBox Pages: 5

x3350 - System - 4192

Brand: IBM Pages: 98

x3500 - System - 7977

Brand: IBM Pages: 124

Brand: IBM Pages: 106

x3200 - System M3 - 7328

Brand: IBM Pages: 100

System x3400 Type 7975

Brand: IBM Pages: 124

System x3300 M4

Brand: IBM Pages: 470

System x iDataPlex dx360

Brand: IBM Pages: 26

DPR-1260 - RangeBooster G Multifunction Print Server

Brand: D-Link Pages: 55

Brand: D-Link Pages: 49

2500 - Color LaserJet Laser Printer

Brand: HP Pages: 24

Brand: HP Pages: 26

4650 - Color LaserJet Laser Printer

Brand: HP Pages: 2

615N - JetDirect Print Server

Brand: HP Pages: 56

4550 - Color LaserJet Laser Printer

Brand: HP Pages: 32

600N - JetDirect Print Server

Brand: HP Pages: 44

170X - JetDirect Print Server

Brand: HP Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands