manualshive.com logo in svg

Lenovo System x3500 M4, Installation And Service Manual

The IBM System x3500 M4 Installation and User manual is available for free download on our website. This comprehensive manual provides step-by-step instructions for setting up and operating the System x3500 M4, ensuring a seamless experience for users. Visit 88.208.23.73:8080 to access this valuable resource.

Share
Download
background image

Chapter 1. The Lenovo System x3500 M4 Type 7383 server

This

Installation and Service Guide

contains information and instructions for setting up your Lenovo System

x3500 M4 Type 7383 server, instructions for installing some optional devices, cabling and configuring the
server, removing and replacing devices, and diagnostics and troubleshooting information.

In addition to the instructions in Chapter 2 “Installing optional devices” on page 25 for installing optional
hardware devices, updating firmware and device drivers, and completing the installation, Business Partners
must also complete the steps in “Instructions for Lenovo Business Partners” on page 25.

The Lenovo System x3500 M4 Type 7383 server is a 5U

1

high performance server. It can be upgraded

to a symmetric multiprocessing (SMP) server through a microprocessor upgrade. It is ideally suited for
networking environments that require superior microprocessor performance, efficient memory management,
flexibility, and large amounts of reliable data storage.

Performance, ease of use, reliability, and expansion capabilities were key considerations in the design of
the server. These design features make it possible for you to customize the system hardware to meet your
needs today and provide flexible expansion capabilities for the future.

The server comes with a limited warranty. For information about the terms of the warranty and getting service
and assistance, see the

Warranty Information

document that comes with the server.

The server contains next generation technologies, which help increase performance and reliability. For more
information, see “What your server offers” on page 11 and “Reliability, availability, and serviceability”
on page 15.

You can obtain up-to-date information about the server and other server products at
http://shop.lenovo.com/us/ en/systems/. At http://www.lenovo.com/support, you can create a personalized
support page by identifying Lenovo products that are of interest to you. From this personalized page, you
can subscribe to weekly email notifications about new technical documents, search for information and
downloads, and access various administrative services.

If you participate in the Lenovo client reference program, you can share information about your
use of technology, best practices, and innovative solutions; build a professional network; and gain
visibility for your business. For more information about the Lenovo client reference program, see
http://www.ibm.com/ibm/clientreference/.

If firmware and documentation updates are available, you can download them from the Lenovo website. The
server might have features that are not described in the documentation that comes with the server, and
the documentation might be updated occasionally to include information about those features, or technical
updates might be available to provide additional information that is not included in the server documentation.
To check for updates, go to http://www.lenovo.com/support.

Note:

The illustrations in this document might differ slightly from your model.

Record information about the server in the following table.

1.

Racks are measured in vertical increments of 4.45 cm (1.75 inches) each. Each increment is called a "U." A 1-U-high
device is 1.75 inches tall

© Copyright Lenovo 2014, 2016

1

Summary of Contents for System x3500 M4































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for System x3500 M4

NEC NECCare Platinum Express5800/A1160 Brochure & Specs preview
NECCare Platinum Express5800/A1160
Brand: NEC Pages: 4
NEC NECCare Gold Express5800/320Fd Maintenance And Service Manual preview
NECCare Gold Express5800/320Fd
Brand: NEC Pages: 11
NEC NEC Express5800/R120d-2E Configuration Manual preview
NEC Express5800/R120d-2E
Brand: NEC Pages: 39
NEC UNIVERGE NEAX 2000 IPS Manual preview
UNIVERGE NEAX 2000 IPS
Brand: NEC Pages: 244
NEC UNIVERGE NEAX 2000 IPS General Description Manual preview
UNIVERGE NEAX 2000 IPS
Brand: NEC Pages: 191
NEC UNIVERGE NEAX 2000 IPS Configuration Manual preview
UNIVERGE NEAX 2000 IPS
Brand: NEC Pages: 96
Vitek VT-IP2MSD102H Brochure preview
VT-IP2MSD102H
Brand: Vitek Pages: 2
Advantech EKI-152X series User Manual preview
EKI-152X series
Brand: Advantech Pages: 94
Quanta Computer STRATOS S400-X44E Technical Manual preview
STRATOS S400-X44E
Brand: Quanta Computer Pages: 251
Novell ZENWORKS PATCH MANAGEMENT 6.4 SP2 - SERVER User Manual preview
ZENWORKS PATCH MANAGEMENT 6.4 SP2 - SERVER
Brand: Novell Pages: 390
Wegener iPump 562 User Manual preview
iPump 562
Brand: Wegener Pages: 33
NEC 120Ra-1 Installation Manual preview
120Ra-1
Brand: NEC Pages: 12
NEC 120Rf-2 Product Manual preview
120Rf-2
Brand: NEC Pages: 20
NEC 120Le Installation Instructions Manual preview
120Le
Brand: NEC Pages: 16
NEC EXP320J User Manual preview
EXP320J
Brand: NEC Pages: 504
NEC 120Rg-2 Getting Started Manual preview
120Rg-2
Brand: NEC Pages: 2
Artesyn Embedded Technology ATCA-9405 Quick Start Manual preview
ATCA-9405
Brand: Artesyn Embedded Technology Pages: 2
Advantech EKI-1511X User Manual preview
EKI-1511X
Brand: Advantech Pages: 76

Brands by name

Popular brands

Load more brands