000
000
000
000
000
000
000
000
000
000000
000000
000000
000000
000000
000000
000000
000000
000000
000000
000000
000000
000000
000000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
0000
Bezel
Hinge assembly
Figure 101. Bezel installation
Step 4.
Close the bezel.
Step 5.
Lock the left-side cover.
Turning the stabilizing feet
Use this information to turn the stabilizing feet.
Read the safety information in “Safety” on page v and “Installation guidelines” on page 35.
If you are replacing a server component in the server, you need to turn off the server and peripheral devices,
and disconnect the power cords and all external cables.
To rotate the front feet, complete the following steps.
Step 1.
Carefully turn the server on its side so that it is lying flat, with the cover facing up.
Attention:
Do not allow the server to fall over.
Step 2.
Carefully position the server on a flat surface, with the feet hanging over the edge of the flat surface
to ease removal.
Step 3.
Press in on the clips that hold the feet in place; then, pry the feet away from the server. In some
cases, you might need a screwdriver to press in on the clips.
188
System x3500 M4 Installation and Service Guide
Summary of Contents for System x3500 M4
