Step 2. Grasp the PCIe adapter by its edges and carefully pull it out of the PCIe slot.
Note:
The PCIe adapter might fit tightly into the PCIe slot. If necessary, alternatively move each
side of the PCIe adapter a small and equal amount until it is removed from the slot.
Figure 38. Removing a PCIe adapter from the riser assembly
Install a new PCIe adapter. See “Install a PCIe adapter on the riser assembly” on page 70.
If you are instructed to return the old LOM adapter, follow all of the packaging instructions and use any
packaging materials that are provided.
Remove a PCIe adapter from the system board
Use this information to remove a PCIe adapter from the system board.
“
Power off
the server
for this task”
on page
Ground package before opening”
Notes:
• Depending on the specific type, your PCIe adapter might look different from the illustration in this topic.
• Use any documentation that comes with the PCIe adapter and follow those instructions in addition to the
instructions in this topic.
.
Hardware replacement procedures
69
Summary of Contents for ThinkAgile MX Certified Node 2U
